Crownvic.net Readers Rides Forums
| cvn Forums > cvn Discussion > General Discussion |
| 1999 CV starting issue |
| Thread Statistics: Users to Post: 1 | Total Posts: 3 | Total Views: 233 |
| You must be logged in to post in or subscribe to this thread. | Pages: 1 |
|
MattyBees
 |
|
• Kekaha, HI, USA |
|
• Registered on 7/14/2016 |
|
• 8 posts |
|
|
|
 Posted:7/14/2016 13:31 |
|
|
Greetings all good to be part of this website.
My 1999 Crown Vic has a starting issue and of course my fault. I had a loose connection on the main wire leading into the main fuse box under hood due to stripped nut. I let it go for awhile before the arcing got bad enough that killed the engine.
I finally fixed the loose connection and the car will not start. it cranks over but no start. Checked fuses and all good, checked fuel pump relay (not sure good or not, ordering new one), checked fuel pump operation by jumping relay ports and works good, sprayed starter fluid into intake and car starts momentarily.
I started removing the front bumper to get to wiring harness to check burnt out wires but not finished (big job).
When I hook up my engine diagnose tool I get error.
How can I get my Crown Vic running again? I'm feeling hopeless.
MattyBees  |
|
MattyBees
|
|
• Kekaha, HI, USA |
|
• Registered on 7/14/2016 |
|
• 8 posts |
|
|
|
 Posted:7/21/2016 23:01 |
|
|
Anyone out there able to help out?
1999 CV cranks but won't start.
All fuses and relays good.
Fuel pump does not come on when key is turned on, but works if jumped through relay.
Everything works: lights, radio, fan, ect.
***When key is turned to start the Engine light does not come on****
***When I hook up an OB tester it reads ERROR***
Inspected the wiring harness under bumper and looks good.
Started when I sprayed starting fluid into intake. |
|
MattyBees
|
|
• Kekaha, HI, USA |
|
• Registered on 7/14/2016 |
|
• 8 posts |
|
|
|
|
Posted:7/21/2016 23:02 |
|
|
Any help please....
1999 CV cranks but won't start.
All fuses and relays good.
Fuel pump does not come on when key is turned on, but works if jumped through relay.
Everything works: lights, radio, fan, ect.
***When key is turned to start the Engine light does not come on****
***When I hook up an OB tester it reads ERROR***
Inspected the wiring harness under bumper and looks good.
Started when I sprayed starting fluid into intake. |
|
| cvn Forums > cvn Discussion > General Discussion |
| 1999 CV starting issue |
| Thread Statistics: Users to Post: 1 | Total Posts: 3 | Total Views: 233 |
| You must be logged in to post in or subscribe to this thread. | Pages: 1 |
|
|
|
