IM001963.jpg 160 hits | 57.16 KB | Posted: 4/25/07 Stock Bronco leafs with two F150 leafs added. (for comparison)
Most Viewed Files
IM000487.jpg 1622 hits | 72.52 KB | Posted: 2/19/04 Here's a mock up of how I think things will line up. I just hung the body clip on and set the tire where the center pin is at. With the axel attached it will actually be "HIGHER" Zoiks!
IM000470.jpg 1430 hits | 85.94 KB | Posted: 2/19/04 Here you can see I notched the frame and installed two sections of 3x4x1/4" steel tube to extend my frame by 4"
IM000477.jpg 1239 hits | 51.64 KB | Posted: 2/19/04 I made the hangers out of two pieces of the 3x4. I cut the pieces to 5" with a cutting wheel, drilled it with out to 5/8ths, cut the bottom out to fit the leaf and then cut it in half to clear the leaf. using the leaf as a spacer I tacked the piece...
IM000476.jpg 1138 hits | 88.25 KB | Posted: 2/19/04 I purchased a 40" of 5x5 angle iron. the frame rails on the truck are 40" from outer to outer frame rail.
IM000484.jpg 1082 hits | 54.51 KB | Posted: 2/19/04 F350's are in short supply in my wrecking yards and when found the yards think they are made of gold. The hangers are parts for a 1990 F350 procured from Mother Ford for about $90.
IM000136.jpg 1076 hits | 35.79 KB | Posted: 6/30/03 I went nuts with the plasma cutter. I think functional won over beauty here. Also you can see my front receiver hitch.
