Randy Zrubek > 1984 Ford Bronco > open folder driveshafts rebuild

factory u-joints: left=front ds, no zert, right =rear ds w/zert
Hits: 249
Size: 28.1 KB
Posted: 11/30/05
factory u-joints: left=front ds, no zert, right =rear ds w/zert		front ds-top, rear ds, bottom
Hits: 190
Size: 35.81 KB
Posted: 11/30/05
front ds-top, rear ds, bottom		close-up
Hits: 233
Size: 37.45 KB
Posted: 11/30/05
close-up		front ds- dis-assmbly. remove clips holding rubber boot
Hits: 254
Size: 43.97 KB
Posted: 11/30/05
front ds- dis-assmbly. remove clips holding rubber boot		clips loosened, separate slip joint
Hits: 270
Size: 38.26 KB
Posted: 11/30/05
clips loosened, separate slip joint
slip-joint, front driveshaft
Hits: 239
Size: 36.33 KB
Posted: 11/30/05
slip-joint, front driveshaft		snap ring holds u-joint cap in yoke
Hits: 213
Size: 25.75 KB
Posted: 11/30/05
snap ring holds u-joint cap in yoke		Remove snap ring, use a vise to press out the cap or drive out with a 5/8" socket
Hits: 293
Size: 27.06 KB
Posted: 11/30/05
Remove snap ring, use a vise to press out the cap or drive out with a 5/8" socket		flip over, remove cap
Hits: 182
Size: 25.7 KB
Posted: 11/30/05
flip over, remove cap		flip over, remove u-joint
Hits: 181
Size: 33.8 KB
Posted: 11/30/05
flip over, remove u-joint
CV (constant velocity) joint, rear ds
Hits: 257
Size: 31.49 KB
Posted: 11/30/05
CV (constant velocity) joint, rear ds		measuring for square tubing shafts
Hits: 66
Size: 62.62 KB
Posted: 11/3/08
measuring for square tubing shafts		measuring for square tubing shafts
Hits: 74
Size: 58.2 KB
Posted: 11/3/08
measuring for square tubing shafts		cutting tubing on power saw
Hits: 81
Size: 70.64 KB
Posted: 11/17/08
cutting tubing on power saw		cutting tubing on power saw
Hits: 67
Size: 68.29 KB
Posted: 11/17/08
cutting tubing on power saw
old power saw works!
Hits: 84
Size: 77.31 KB
Posted: 11/17/08
old power saw works!		welded 1.5" tubing piece to end yoke
Hits: 73
Size: 61.1 KB
Posted: 11/17/08
welded 1.5" tubing piece to end yoke		both pieces of driveshaft
Hits: 100
Size: 58.26 KB
Posted: 11/17/08
both pieces of driveshaft		square driveshaft assembled, 28" long
Hits: 108
Size: 58.93 KB
Posted: 11/17/08
square driveshaft assembled, 28" long		rear driveshaft installed
Hits: 131
Size: 71.54 KB
Posted: 1/7/09
rear driveshaft installed
notched tranny crossmember for front driveshaft
Hits: 132
Size: 62.77 KB
Posted: 1/7/09
notched tranny crossmember for front driveshaft		stock front driveshaft installed
Hits: 132
Size: 63.37 KB
Posted: 1/7/09
stock front driveshaft installed		   
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2009, LHB Companies LLC, DBA SuperMotors.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog