2002 Heavy Duty C6 with Double Clutch Plates
2002 New Process 208 Racing Transfer Case
2002 East County Driveline Hi-Angle Driveshafts
Ford 9" Rear End with 4.56 Gears and ARB Locker
Dana 44R TTB with 4.56 Gears and ARB Locker
Recently Purchased a 1979 Dana 44 Solid Axle to Swap out the Twin Traction Beams.
Notes:
Bought the Bronco in 2001 for $500 in very bad condition..
I've replaced almost every mechanical part at least once - including the Engine, Transmission, and Transfer Case, and Even replaced the FRAME with a 1993.
DCP03169.JPG 420 hits | 55.93 KB | Posted: 6/30/03 After replacing the Bell Housing, I learned that ARB Lockers don't mean you can go up 45* Incline hills with soft sand - I dug 4 HUGE 37" Holes with all 4 tires until the frame touched the ground!!! I COMPLETELY DESTORYED ALL THE FORWARD GEARS IN T...
painted.jpg 378 hits | 68.48 KB | Posted: 7/14/03 2 Coats of MagnetPaints.com "Chassis Saver" to prevent any future rust.
body4.jpg 360 hits | 81.41 KB | Posted: 7/14/03 Original 1981 Body Installed on the Newer, Restored 1993 Frame
mbronco.jpg 350 hits | 38.98 KB | Posted: 7/31/03 Topless at the Beach!
NewEngine.jpg 341 hits | 38.98 KB | Posted: 6/30/03 Brand New Recon Performance 351W HO Crate Motor!! dynomometer tested at 360.44 lbft Torque @ 3600 RPM and 277.34 HP @ 4.400 RPM...
