HPIM0540.JPG
729 hits | 83.31 KB | Posted: 7/20/08
The old 351w ready to come out.

HPIM0541.JPG
646 hits | 83.68 KB | Posted: 7/20/08
The 460 in the donor truck

HPIM0592.JPG
683 hits | 72.95 KB | Posted: 7/20/08
351w finally out, waiting to be sold.

HPIM0677.JPG
630 hits | 70.68 KB | Posted: 7/20/08
The donor truck, ready to be disassembled.

HPIM0680.JPG
622 hits | 95.19 KB | Posted: 7/20/08
One afternoon of progress.

HPIM0687.JPG
671 hits | 79.76 KB | Posted: 7/20/08
Nice surprise... a factory oil filter re-locater.

HPIM0690.JPG
649 hits | 89.67 KB | Posted: 7/20/08
Almost there.

HPIM0689.AVI
1035 hits | 5.8 MB | Posted: 7/20/08
How to win a battle with a stuck bed bolt. 30 tow strap hooked to a Powerstroke F250.

HPIM0702.JPG
699 hits | 79.78 KB | Posted: 7/20/08
Cutting the frame up to load on the scrap trailer.

HPIM0703.JPG
592 hits | 82.67 KB | Posted: 7/20/08
All the parts that are getting swapped to the bronco... crammed in my tiny garage.

HPIM0704.JPG
614 hits | 79.74 KB | Posted: 7/20/08
Waiting on assistance to take off the remaining part of the frame.

EFI 460 Big Block.wmv
1185 hits | 1.44 MB | Posted: 7/20/08
The 460 running in the donor truck.

HPIM0536.JPG
738 hits | 84.27 KB | Posted: 7/20/08
Justin's Toyota. He's the guy I bought the donor truck from.

Hpim0758.jpg
736 hits | 71.44 KB | Posted: 7/20/08
Dash taken out of the bronco to be rewired. Bench seat from the donor truck installed to replace th...

Hpim0775.jpg
741 hits | 71.85 KB | Posted: 7/27/08
Dash being rewired.

Hpim0779.jpg
776 hits | 72.81 KB | Posted: 7/27/08
Starting on the disassembly of the 460.

Hpim0780.jpg
883 hits | 61.93 KB | Posted: 7/27/08
Intake off, assessing the sludge in the oil valley.

Hpim0782.jpg
992 hits | 35.17 KB | Posted: 7/27/08
Nasty wear on the camshaft.

Hpim0783.jpg
815 hits | 49.38 KB | Posted: 7/27/08
The thickest of the sludge that I cleaned out.

Hpim0784.jpg
782 hits | 72.71 KB | Posted: 7/27/08
Sludge all over the rocker arms and springs on the heads.

Hpim0785.jpg
733 hits | 60.62 KB | Posted: 7/27/08
Sludge on the push rods as well.

Hpim0786.jpg
688 hits | 63.11 KB | Posted: 7/27/08
Sludge on the bottom of the intake manifold.

HPIM0789.JPG
775 hits | 87.47 KB | Posted: 8/2/08
Pistons looking pretty decent... just a little carbon build up that cleaned off easily.

HPIM0790.JPG
721 hits | 66.51 KB | Posted: 8/2/08
Cylinder walls were stunning. No bad scratches, scuffs, or major damage.

HPIM0799.JPG
2034 hits | 80.98 KB | Posted: 8/11/08
The 460 mounted in the bronco!

460 Bronco.wmv
1217 hits | 3.37 MB | Posted: 8/22/08
Everything all mounted and bolted in. Breaking the new cam and lifters in so I could set the timing...

HPIM0802.JPG
653 hits | 77.33 KB | Posted: 8/29/08
The original drive shaft wasn't long enough. Bought a longer one at the junk yard. Combined the ju...

HPIM0803.JPG
586 hits | 78.61 KB | Posted: 8/29/08
The junk yard drive shaft (from an 82 bronco with a C6 auto or T-18 manual - 30 inches long fully co...

HPIM0804.JPG
605 hits | 79.2 KB | Posted: 8/29/08
What's left of the stock drive shaft. (90 bronco with an E4OD - 23 inches fully compressed)

Hpim0805.jpg
577 hits | 46.86 KB | Posted: 8/29/08
All back together and everything working. Few minor bugs to still work out.

HPIM0806.JPG
575 hits | 75.61 KB | Posted: 8/29/08
Sitting back on the 15 x 10 inch rims wrapped with 35x12.5 Procomp mud terrains.

HPIM0807.JPG
621 hits | 85.18 KB | Posted: 8/29/08
The 460 in the bronco... looks like it came from the factory that way.

Hpim0808.jpg
563 hits | 60.63 KB | Posted: 8/29/08
All washed off, getting ready to tackle minor wiring issues so the back window will roll down.