Randy Zrubek > 1984 Ford Bronco > open folder SecretShakerProject

shaker assembly purchased from Rare SPares, Australia
Hits: 2048
Size:
Posted: 6/29/03
shaker assembly purchased from Rare SPares, Australia		front view of engine. You can see the off-set from center, and the bottom lip of the cowl at the rea...
Hits: 1863
Size: 41.12 KB
Posted: 6/29/03
front view of engine. You can see the off-set from center, and the bottom lip of the cowl at the rea...		driver's-side view of engine. The carb is set way back under the cowl, angled back, and 2" off-cente...
Hits: 1641
Size: 42.9 KB
Posted: 6/29/03
driver's-side view of engine. The carb is set way back under the cowl, angled back, and 2" off-cente...		Shaker base mounted to OEM Holley carb. Had to cut about 2" off rear edge of top ring to clear firew...
Hits: 1678
Size: 39.58 KB
Posted: 6/29/03
Shaker base mounted to OEM Holley carb. Had to cut about 2" off rear edge of top ring to clear firew...		The problem mounting the scoop to the base! I plan to mount the scoop to a flat top plate that bolts...
Hits: 1616
Size: 37.18 KB
Posted: 6/29/03
The problem mounting the scoop to the base! I plan to mount the scoop to a flat top plate that bolts...
early design of airbox, using radiator shroud cut up into sections
Hits: 1182
Size: 64.43 KB
Posted: 4/18/06
early design of airbox, using radiator shroud cut up into sections		early design of airbox with diagram
Hits: 1236
Size: 59.75 KB
Posted: 4/18/06
early design of airbox with diagram		airbox design - scrapped due to large size
Hits: 1177
Size: 38.28 KB
Posted: 4/18/06
airbox design - scrapped due to large size		another early design using the airfilter box from my 88 EFI Bronco.
Hits: 1220
Size: 43.97 KB
Posted: 4/18/06
another early design using the airfilter box from my 88 EFI Bronco. 		Modified midplate. For now, I'll call it an "adapter". This is just a crude design to get the proper...
Hits: 1582
Size: 39.8 KB
Posted: 6/29/03
Modified midplate. For now, I'll call it an "adapter". This is just a crude design to get the proper...
Scoop mounted to top plate, mounted to adapter
Hits: 1605
Size: 29.97 KB
Posted: 6/29/03
Scoop mounted to top plate, mounted to adapter		modified mid-plate, front-support bracket.
Hits: 1570
Size: 33.43 KB
Posted: 7/22/03
modified mid-plate, front-support bracket.		scoop and top plate mounted to flat metal pan that is bolted to the air box, with a cutout for airfl...
Hits: 1803
Size: 30.33 KB
Posted: 7/22/03
scoop and top plate mounted to flat metal pan that is bolted to the air box, with a cutout for airfl...		Front-support bracket is bolted to accessory/AC bracket at front of engine
Hits: 1525
Size: 31.13 KB
Posted: 7/22/03
Front-support bracket is bolted to accessory/AC bracket at front of engine		shaker hood, top view, Ford medium blue metallic, center is Ford indigo blue metallic, both are uret...
Hits: 1580
Size: 24.19 KB
Posted: 7/1/03
shaker hood, top view, Ford medium blue metallic, center is Ford indigo blue metallic, both are uret...
shaker hood, underside view, braces were cut back 2" from opening for fitment of rubber seal on shak...
Hits: 1717
Size: 54.73 KB
Posted: 7/1/03
shaker hood, underside view, braces were cut back 2" from opening for fitment of rubber seal on shak...		hood closed, scoop installed. Project finished!
Hits: 2725
Size: 31.72 KB
Posted: 7/22/03
hood closed, scoop installed. Project finished!		   
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2025 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog