Picture 107.jpg
510 hits | 56.43 KB | Posted: 5/28/04
the location I chose to put my washer res. and 7.62 MM ammo can

Picture 108.jpg
528 hits | 41 KB | Posted: 5/28/04
how its gonna look in the truck. The res came out of a 89 Mercury Topaz. There was an escort there...

Picture 109.jpg
516 hits | 40.34 KB | Posted: 5/28/04
the nozzle and motor. you can use all the stock stuff at stock length.

Picture 110.jpg
579 hits | 31.01 KB | Posted: 5/28/04
peice of 16 gauge cut about 7 x 1"

Picture 111.jpg
495 hits | 40.02 KB | Posted: 5/28/04
bolted together using the Topaz mounting bolts and clips

Picture 112.jpg
517 hits | 30.91 KB | Posted: 5/28/04
holes drilled in bracket to rivet to ammo can

Picture 113.jpg
535 hits | 35.16 KB | Posted: 5/28/04
riveted in place

Picture 114.jpg
517 hits | 41.29 KB | Posted: 5/28/04
used header bolts and some grade 5 nuts to secure the Ammo can to the inner fender.

Also check ou...

Picture 115.jpg
522 hits | 41.76 KB | Posted: 5/28/04
used 14 gauge metal with holes in it for the other bracket.

Picture 118.jpg
595 hits | 43.87 KB | Posted: 5/28/04
Ammo can bolted in

Picture 116.jpg
581 hits | 58.39 KB | Posted: 5/28/04
bent the other bracket to contour the fender and riveted it in place.
installed the 2 bolts hoooked...

Picture 117.jpg
528 hits | 57.84 KB | Posted: 5/28/04

Picture 119.jpg
621 hits | 58.3 KB | Posted: 5/28/04
put the cover on the ammo can and fill it with tools

Picture 120.jpg
467 hits | 48.11 KB | Posted: 5/28/04
Enjoy a clean windshield!