IM000190.jpg
672 hits | 23.95 KB | Posted: 6/30/03
Here is where our story begins. A place most of us know well.

IM000191.jpg
788 hits | 43.02 KB | Posted: 6/30/03
I found my compressor out of this Volvo. It also has a bitchin' bracket on it already in which I jus...

IM000195.jpg
766 hits | 43.14 KB | Posted: 6/30/03
Here it is in all its glory!

IM000192.jpg
748 hits | 40.8 KB | Posted: 6/30/03
Here's the exact pump if anyone is curious.

IM000197.jpg
746 hits | 39.72 KB | Posted: 6/30/03
I was going to get a short belt for the compressor but hey! This works!

IM000196.jpg
726 hits | 46.64 KB | Posted: 6/30/03
Ugly but functional.

IM000198.jpg
728 hits | 28.46 KB | Posted: 6/30/03
Here's a close up of the tabs I welded onto the stock Volvo bracket. Basically all I did was cut so...

IM000199.jpg
636 hits | 73.22 KB | Posted: 6/30/03
Tension Bracket. Just 3 holes in a piece of angle iron.

IM000200.jpg
700 hits | 62.61 KB | Posted: 6/30/03
Another close up of the tabs welded onto the stock Volvo bracket.

IM000203.jpg
656 hits | 67.78 KB | Posted: 6/30/03
Here is the bracket painted

IM000204.jpg
668 hits | 35.1 KB | Posted: 6/30/03
Here is my manifold minus the pressure switch. It works in this configuration but it helps to have ...

IM000205.jpg
767 hits | 28.13 KB | Posted: 6/30/03
I had a crank case breather laying around so I just pushed it on the intake hose. This will work un...

IM000207.jpg
686 hits | 65.47 KB | Posted: 6/30/03
Here is the air fitting on my rear bumper. I know it's ugly but it holds the pressure just fine.

IM000446.jpg
657 hits | 78.08 KB | Posted: 12/18/03
Here's a picture of it with the front clip removed

IM000648.jpg
685 hits | 72.93 KB | Posted: 8/24/04
Long after I've had it but here's a good shot with all the body pannels out of the way.

IM001123.jpg
521 hits | 66.31 KB | Posted: 7/8/05

IM001124.jpg
497 hits | 75.7 KB | Posted: 7/8/05