dscf0005.jpg
577 hits | 88.68 KB | Posted: 2/12/04
Holley 600CFM carb in process of EFI conversion

intake_1.jpg
612 hits | 75.67 KB | Posted: 8/23/05
Shot of 400 performer intake with injector bungs drilled out for installation of bung inserts

intake_2.jpg
737 hits | 53.87 KB | Posted: 8/23/05
Injector bung fitted by hand into drilled pocket. Will be TIG'd once all have been installed to cor...

FuelRail_1.jpg
559 hits | 67.93 KB | Posted: 8/24/05
Here's the manifold all mocked up without injectors installed, bungs are only pressfit in at the mom...

dscf0054.jpg
631 hits | 71.15 KB | Posted: 10/4/05

dscf0183.jpg
464 hits | 56.15 KB | Posted: 2/17/06
Overhead view of Performer 400 EFI manifold

dscf0184.jpg
425 hits | 40.79 KB | Posted: 2/17/06
Bottom of injector bung, Excess must be removed and runner shaped to original contour.

dscf0186.jpg
443 hits | 41.24 KB | Posted: 2/17/06
Here's the runner with the injector bung shaped properly, just not polished yet.

dscf0195.jpg
427 hits | 46.01 KB | Posted: 3/21/06
Throttlebody adapter plate being marked up for machine work.

EDIS_Inst1.jpg
480 hits | 73.28 KB | Posted: 3/21/06
EDIS Module mounted in location previously occupied by the DuraSpark II module

dscf0207.jpg
611 hits | 84.69 KB | Posted: 3/21/06
Throttle body attached to manifold, finally.

dscf0206.jpg
620 hits | 58.64 KB | Posted: 3/22/06
Adapter plate tapping for TB attachment

Screenshot1.jpg
536 hits | 41.34 KB | Posted: 7/12/06
Initial screenshot as laptop is connected to ECU

Screenshot2.jpg
577 hits | 53.32 KB | Posted: 7/12/06
Engine running on ECU (Simulated)

Screenshot3.jpg
547 hits | 60.69 KB | Posted: 7/12/06
Engine constants and ECU initialization

Screenshot4.jpg
603 hits | 59.19 KB | Posted: 7/12/06
Calculation of required fuel for one injector/one cycle