7564.jpg
689 hits | 14.71 KB | Posted: 1/9/06
new Edelbrock 2V "Air Gap" intake

edlperformer.jpg
511 hits | 10.3 KB | Posted: 1/9/06
Edelbrock Performer

edlF351.jpg
567 hits | 17.38 KB | Posted: 1/9/06
Edelbrock F351, predates the Performer

F351underside.jpg
268 hits | 39.15 KB | Posted: 12/28/12

AUSsqflchoke.jpg
562 hits | 50.32 KB | Posted: 3/18/07
Australian 4bbl/2V intake with choke stove provision

aussie4bbl2V.jpg
580 hits | 48.09 KB | Posted: 4/13/06
Aussie 302C intake, 4bbl carb with 2V ports

US4boltchoke.jpg
535 hits | 19.11 KB | Posted: 3/18/07
US 4 bolt choke stove

2VM&C.jpg
496 hits | 41.34 KB | Posted: 1/9/06
factory Ford 2V 351M and 2V 351C side by side

4V400XE.jpg
538 hits | 66.63 KB | Posted: 4/1/06
pre-production numbers

EGR4004VXE.jpg
477 hits | 51.67 KB | Posted: 4/1/06
pre-production numbers ink stamped on the EGR plate

width.jpg
597 hits | 72.17 KB | Posted: 4/1/06
351M/400 4bbl intake

4004V2.jpg
725 hits | 36.12 KB | Posted: 3/25/06
351M/400 4V, the intake that does not exist! 4300/4350 spreadbore and 2V sized ports.

4V4300.jpg
581 hits | 18.42 KB | Posted: 1/9/06
factory Ford 4V for the 4300/4350 carb

clevelands 014.jpg
593 hits | 13.52 KB | Posted: 1/9/06
iron B&A Street Boss "Clevor" intake, note rear end seal

clevelands 015.jpg
558 hits | 14.79 KB | Posted: 1/9/06
iron B&A Track Boss "Clevor" intake, note rear end seal

squarebore.jpg
558 hits | 35.05 KB | Posted: 4/1/06
holley flange 351C intake

shelby351C.jpg
616 hits | 22.91 KB | Posted: 4/5/06
Shelby logo'd intake was only available "over the counter"

polished BT.jpg
540 hits | 12.23 KB | Posted: 3/13/06
polished Blue Thunder

bluethunder.jpg
502 hits | 27.81 KB | Posted: 3/10/07

opened.jpg
501 hits | 27.37 KB | Posted: 3/10/07
Shelby with a 4500 dominator carb flange

D1ZX-9425-DA-CA.jpg
947 hits | 47.45 KB | Posted: 1/24/10
D1ZX-9425-DA and -CA

portosonic.jpg
537 hits | 25.71 KB | Posted: 3/10/07

rouschA3int.jpg
583 hits | 24.63 KB | Posted: 1/9/06
Rousch for A3 heads

A3intports.jpg
539 hits | 23.26 KB | Posted: 1/9/06
Rousch A3 ports

hollystrtdom.jpg
688 hits | 17.66 KB | Posted: 1/9/06
Holley Street Dominator, 2V single plane

streetdommy.jpg
451 hits | 11.6 KB | Posted: 3/7/07
Holley Street Dominator runners

torker351.jpg
542 hits | 17.9 KB | Posted: 1/9/06
Edelbrock Torker 351

TorkerDommy1.jpg
272 hits | 46.2 KB | Posted: 1/19/15

TorkerDommy2.jpg
233 hits | 47.27 KB | Posted: 1/19/15

Scorpion1.jpg
257 hits | 54.98 KB | Posted: 1/19/15

Scorpion2.jpg
259 hits | 47.14 KB | Posted: 1/19/15

Scorpion3.jpg
269 hits | 51.45 KB | Posted: 1/19/15

ScorpionDommy.jpg
336 hits | 25.97 KB | Posted: 1/19/15

StripDominator1.jpg
279 hits | 55.83 KB | Posted: 1/19/15

StripDominator2.jpg
265 hits | 50.76 KB | Posted: 1/19/15

StripDominator3.jpg
264 hits | 45.74 KB | Posted: 1/19/15

dialaflow.jpg
520 hits | 31.3 KB | Posted: 3/10/07

B&Aalloy.jpg
459 hits | 16.76 KB | Posted: 3/10/07

7517.jpg
488 hits | 14.26 KB | Posted: 3/10/07

CHIclevor.jpg
626 hits | 20.17 KB | Posted: 1/9/06
CHI 3V Clevor intakes, 4500 dominator and 4150 flanges

xcellerator.jpg
558 hits | 24.07 KB | Posted: 3/25/06
Weiand Xcellerator

activeintake.jpg
652 hits | 47.52 KB | Posted: 2/26/06
Active intake

yatesSVO.jpg
551 hits | 19.08 KB | Posted: 1/9/06
Ford SVO for Yates heads, requires valley cover

yatesC3inOz.jpg
501 hits | 16.22 KB | Posted: 3/18/07

yatesC3inOz2.jpg
517 hits | 13.96 KB | Posted: 3/18/07

AFD2016.jpg
258 hits | 33.66 KB | Posted: 10/13/16

AFDintake.jpg
207 hits | 50.47 KB | Posted: 10/13/16

holley4300.jpg
558 hits | 26.61 KB | Posted: 4/5/06
carb adapter plate to mount a square flange carb on a 4300 style intake

4300holley.jpg
532 hits | 25.24 KB | Posted: 4/5/06
note ear to cover the EGR passage

cdq1.jpg
674 hits | 17.34 KB | Posted: 1/9/06
custom made 2X4 intake

removablearticle.jpg
572 hits | 53.82 KB | Posted: 9/17/06

removablearticle2.jpg
501 hits | 31.34 KB | Posted: 9/17/06

6pack2.jpg
586 hits | 53.58 KB | Posted: 1/9/06
3X2 interchangeable top with carbs, side view

theremovable1.jpg
502 hits | 36.79 KB | Posted: 9/17/06

theremovable2.jpg
504 hits | 35.65 KB | Posted: 9/17/06

theremovable3.jpg
507 hits | 39.87 KB | Posted: 9/17/06

the removable4.jpg
514 hits | 38.87 KB | Posted: 9/17/06

INTAKE.JPG
464 hits | 32.06 KB | Posted: 9/17/06

INTAKE2.JPG
473 hits | 45.6 KB | Posted: 9/17/06

intaketop.jpg
456 hits | 32.82 KB | Posted: 9/17/06

intaketop2.jpg
454 hits | 36.05 KB | Posted: 9/17/06

clevelandinterchangeable6v1c.jpg
525 hits | 58.07 KB | Posted: 9/17/06

EFIon2V.jpg
505 hits | 55.69 KB | Posted: 1/26/07
cast iron 2V intake w/EFI installed on it

400efiadapterplate.jpg
436 hits | 32.02 KB | Posted: 2/14/07
adapter plate for 400 using Cleveland intake has EFI injector holes machined in

kinsler1.JPG
454 hits | 20.25 KB | Posted: 3/10/07

kinsler2.JPG
476 hits | 24.09 KB | Posted: 3/10/07

kinsler3.JPG
406 hits | 20.78 KB | Posted: 3/10/07

crossboss302.jpg
575 hits | 20.62 KB | Posted: 9/17/06

crossboss.jpg
1069 hits | 81.54 KB | Posted: 2/8/06
Boss 302 CrossBoss and in-line 4bbl w/ spacer plates on a 351C

webers.jpg
557 hits | 26.42 KB | Posted: 3/3/06

57_12.jpg
572 hits | 46.06 KB | Posted: 1/9/06
four weber carbs on 4V IR manifold side view

cc_12.jpg
563 hits | 48.57 KB | Posted: 1/9/06
four Weber carbs on an individual runner manifold,top view

UltraFlowCleveland.jpg
580 hits | 30.92 KB | Posted: 3/13/06
prototype UltraFlow multi-point fuel injection.

SK463471.jpg
624 hits | 17.77 KB | Posted: 4/28/06
a different "Bud Moore" style intake

SK463472.jpg
566 hits | 19.4 KB | Posted: 4/28/06

SK463473.jpg
623 hits | 19.09 KB | Posted: 4/28/06

400efiadapterplate.jpg
452 hits | 32.02 KB | Posted: 3/10/07

chromoffy.jpg
556 hits | 91.4 KB | Posted: 3/10/07

offy6040a.jpg
528 hits | 40.03 KB | Posted: 9/3/11
'Isolated Runner' adapter for Offy Ram
not true IR but very little shared plenum

offy6040b.jpg
601 hits | 47.39 KB | Posted: 9/3/11
carbs mount sideways on the Offy T-ram

enderletopper1.jpg
575 hits | 17.48 KB | Posted: 2/15/06
side/bottom view of Enderle Offy T-ram top

18_1.jpg
519 hits | 17.77 KB | Posted: 2/15/06
Offy tunnel ram top for an Enderle injector

budmooremaxiplenum.jpg
668 hits | 18.06 KB | Posted: 2/8/06
NASCAR Bud Moore intake

budmoorebottom.jpg
578 hits | 19.95 KB | Posted: 2/8/06
it's a folded down tunnel ram

insideoftop.jpg
590 hits | 27.63 KB | Posted: 2/8/06
a little plenum divider

budmooreplenum.jpg
590 hits | 19.66 KB | Posted: 2/8/06
inside the box

BM471.jpg
639 hits | 38.61 KB | Posted: 3/13/06
B&M supercharger kit

faker.jpg
912 hits | 23.6 KB | Posted: 4/16/06
simulated enderle injection uses a carb on a special blower top plate and the bug catcher to cover i...

clevelands 011.jpg
617 hits | 70.53 KB | Posted: 1/9/06
Australian 2V blower manifold

bloweram.jpg
632 hits | 22.27 KB | Posted: 3/25/06
tunnel ram base converted to a supercharger intake

bloweram2.jpg
554 hits | 27.82 KB | Posted: 3/25/06
the blow-off valve mounts under the small middle hole

f0_1.jpg
573 hits | 23.24 KB | Posted: 1/9/06
Hampton 4V blower manifold

dyers.jpg
564 hits | 27.42 KB | Posted: 3/25/06
Dyers 6-71

PSE.jpg
576 hits | 19.73 KB | Posted: 3/7/09
PSE adapter allows use of any Cleveland manifold on an FE engine