IM000135.jpg 214 hits | 93.58 KB | Posted: 11/19/08 The same view from the passenger side. Now I'll get to work on the spring hangers.
IM000133.jpg 183 hits | 95.09 KB | Posted: 11/19/08 Here's the spring packs setting against the square tube. Looks pretty good so far.
IM000134.jpg 140 hits | 84.07 KB | Posted: 11/19/08 Notched the passenger side to get that side in there.
IM000132.jpg 145 hits | 88.57 KB | Posted: 11/19/08 Got a couple of sticks of 2X4 3/16" thick. Cut one just long enough to fit between the framerails. Notched the end to slide it in. (Driver's side).
leaf 003.jpg 217 hits | 93.97 KB | Posted: 9/7/08 The rear shackle will prove to be interesting on the passenger side. May need to move the catalytic converter.
Escape bumper.JPG 1311 hits | 57.55 KB | Posted: 2/27/04 The Escape Rear bumper from Jim Hunter. I swapped out the 2 inner lights for clear backup lights....
dcp_2789.jpg 1241 hits | 85.28 KB | Posted: 2/27/04 Painted, re-geared to 5.38s and a Detroit for good measure. Bolted under the Bronco.
dcp_2786.jpg 1207 hits | 78.95 KB | Posted: 2/27/04 Dana 60, complements of a 79 F250.
SAS Got a Dana 44HD, dropped in 5.38's and a Detroit EZ, fabbed a truss and under the rig it went. Next is the fabrication of the suspension...design courtesy of Strom Enterprise...
1,200.00
07/07/02
Modification
129012
Dana 60 Got a Dana 60 for the rear. Put 5.38's and a Detroit in it. Went under the rig and then to Broncofest.
1,100.00
05/29/00
Modification
3G Allternator Added a 130Amp Alternator to upgrade the charging system.
