01Lost.JPG
1593 hits | 122.84 KB | Posted: 11/5/09

It's actually a LOT dirtier than this pic shows, and the tree by the driver's door touches the paint...
14LHS.JPG
1133 hits | 68.58 KB | Posted: 11/6/09

This is after a thorough rinse. The camper was nearly black. This is how it looked 5 years ago:
[...
10VINa.JPG
1323 hits | 73.74 KB | Posted: 11/6/09

Vehicle Certification (VC) Label

See this:
[url=http://www.supermotors.net/registry/media/72354]...
11VacMap.JPG
2115 hits | 55.72 KB | Posted: 11/6/09

VECI Label
IF THE IMAGE IS TOO SMALL, click it.

[url=http://www.supermotors.net/registry/media/8...
DateStamp.JPG
655 hits | 111.15 KB | Posted: 9/1/14

Build Date Stamp on hood: JUN30 1993

[url=http://www.supermotors.net/vehicles/registry/media/103514...
57EEC.JPG
1547 hits | 65.49 KB | Posted: 2/24/10

EEC calibration code A2Z2 for '93 5.8L 1/2-ton w/E4OD.
12AxleTagF.JPG
1437 hits | 61.97 KB | Posted: 11/6/09

Front Axle Tag

[url=http://www.supermotors.net/registry/media/544471][img]http://www.supermotors....
13AxleTaR.JPG
2441 hits | 86.46 KB | Posted: 11/6/09

Original Rear Axle Tag (replaced in 2014 with one from another '93 Bronco)

S837B
3L55 8 8 3F24

[ur...
BW1356e.JPG
1504 hits | 74.2 KB | Posted: 12/20/09

Transfer case ID tag

Borg-Warner 1356 ESOF with fixed rear companion flange
17Receiver.JPG
1145 hits | 62.41 KB | Posted: 11/6/09

Class 3 Hitch Receiver
Reese 36034 appears to be the incorrect model for a Bronco
18TrlrConn.JPG
1056 hits | 47.39 KB | Posted: 11/6/09

This truck has the trailer towing package, including quad front shocks, aux trans cooler, F&R sway b...
93SCDS.JPG
1085 hits | 80.49 KB | Posted: 11/6/09

As of the upload date, this SCDS hadn't been recalled because it's located where a fire isn't likely...
32Receiver.JPG
1226 hits | 59.21 KB | Posted: 11/8/09

This receiver was installed poorly, and it underhangs the fuel tank slightly. I was still able to g...
34TailPipe.JPG
1104 hits | 65.39 KB | Posted: 11/8/09

The muffler & tailpipe cracked off while my brother-in-law still owned it, and he never fixed it, so...
38Cluster.JPG
1139 hits | 69.75 KB | Posted: 11/8/09

There were a couple of burned bulbs, so I pulled the cluster, repaired the bezel, & did a few mods.
39LowFuelLight.JPG
1885 hits | 26.8 KB | Posted: 11/8/09

On other clusters I've modded, I've drilled a hole for the LED. On this one, I just put the LED beh...
40BezelReinf.JPG
3134 hits | 82.08 KB | Posted: 11/8/09

It's common for these screw holes to shatter, but this is a quick, easy, cheap, & effective repair, ...
42BumperFdent.JPG
1661 hits | 78.47 KB | Posted: 11/9/09

The front bumper was dented behind the license plate holder, so I took it off & knocked it out.
50BumperTabs.JPG
1414 hits | 49.59 KB | Posted: 11/12/09

The front bumper mounting tabs were bent, so I straightened them with a big adjustable wrench.
51TowEyes.JPG
1119 hits | 78.31 KB | Posted: 11/12/09

And I added some Ford front recovery eyes on custom brackets that include light tabs, but they have ...
45Muffler.JPG
1171 hits | 85.3 KB | Posted: 11/12/09

Midas did such a crappy job of hanging this muffler that it cracked & fell off about a year later (6...
47Muffler.JPG
1082 hits | 59.14 KB | Posted: 11/12/09

This is just ONE of the reasons I'm not letting Midas install the replacement. Their welds are horr...
46Muffler.JPG
1273 hits | 58.19 KB | Posted: 11/12/09

To get a free muffler without paying Midas to install it, I had to give up the receipt - GOOD RIDDAN...
9Finished.JPG
5041 hits | 70.1 KB | Posted: 11/14/09

These factory Ford recovery eyes mount to 3 parts, one of which has no welding or bending. They att...
TGdashSw92-96.JPG
1339 hits | 69.04 KB | Posted: 11/20/09

Despite my best efforts, the original '93 switch just isn't working reliably, and this was only ~$30...
56Cleanup.JPG
1383 hits | 75.11 KB | Posted: 11/24/09

On a nice, cold, rainy day, he got to spend his first quality time with the truck. This is just the...
BFG32s.JPG
2623 hits | 95.3 KB | Posted: 11/26/09

The Michelin LTX AT 31x10.50s were ~6 years old & getting lumpy, so it was time to change them out. ...
Trans1.JPG
5316 hits | 105.09 KB | Posted: 9/5/10

This E4OD has never been rebuilt, and is still working OK for some reason. But it has leaked interm...
Trans2.JPG
5581 hits | 106.74 KB | Posted: 9/5/10

Rather than drop this heavy beast all the way to the ground, I just left it on the jack and rolled i...
Trans3.JPG
3600 hits | 98.89 KB | Posted: 9/5/10

With the new $8 seal E9TZ-7A248-B installed, it's g...
DateStamp1.JPG
1073 hits | 102.13 KB | Posted: 9/5/14

Build Date Stamp on core support: 7193
(July 1, 1993)

[url=http://www.supermotors.net/vehicles/regi...
PN-Radiator.JPG
834 hits | 101.42 KB | Posted: 9/5/14

'93 5.8L E4OD w/trailer w/o oil cooler
-171Z-28FTK240-
EngineCal.JPG
658 hits | 108.46 KB | Posted: 9/5/14

617461 847
PN-EGR.JPG
1274 hits | 111.96 KB | Posted: 9/5/14

F3TE-9F483-E2A
FrameVIN.jpg
639 hits | 93.99 KB | Posted: 10/17/14

Frame VIN stampings
IF THE IMAGE IS TOO SMALL, click it.

About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2024 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog