Gasketc.JPG
1142 hits | 143.51 KB | Posted: 9/15/14
Victor MS15202W intake gasket
Victor JV1034 timing cover & water pump gaskets
Victor OS32492 oil pan...

VC9IronRemover.JPG
982 hits | 66.93 KB | Posted: 6/5/15
This stuff is EGGspensive! ~$20/qt at a discount. But the block is rusty inside the coolant journa...

StanTstat.JPG
810 hits | 83.53 KB | Posted: 10/23/15
New Stant 195°F 45359 SuperStat ([url=https://www.a...

SparkWires.JPG
621 hits | 117.22 KB | Posted: 9/15/14
Standard 6906 8mm silicone plug wire set

GabrielShocks.jpg
1398 hits | 135.86 KB | Posted: 9/23/14
Gabriel Shocks for '80-96 Broncos/F150s
Quad front-front [url=https://www.amazon.com/dp/B000E8X5GY]G...

FelProOS34506R.jpg
1025 hits | 61.89 KB | Posted: 3/13/15
FelPro OS34506R Steel-Reinforced 1-piece Nitrile Oil Pan Gasket for 5.8L smallblocks

PM249.JPG
943 hits | 109.66 KB | Posted: 9/20/14
Siemens supplied the OE blower motors in the 90s (& possibly before).

Blower Motor Siemens PM249; [...

SW1951C.JPG
2699 hits | 99.95 KB | Posted: 9/18/14
MotorCraft SW1951C (E9TZ-11450-B) Starter Relay

[ur...

GasTankGrmt.JPG
2191 hits | 75.32 KB | Posted: 10/9/15
5.8L Fuel Tank Vent Grommet

The original had softened & collapsed when the truck sat for 6 years, a...

Bugflector3.JPG
701 hits | 111.06 KB | Posted: 9/15/14
Auto Ventshade (AVS) BugFlector II 25738

[url=http://www.supermotors.net/registry/media/1006340][im...

Stepshields.JPG
689 hits | 105.94 KB | Posted: 9/15/14
Auto Ventshade (AVS) Stepshields 88068 (NLA in 2019; replaced by [url=https://www.amazon.com/dp/B000...

MirDoorR.jpg
633 hits | 73.98 KB | Posted: 3/26/16
Power Memory Signal Heated Mirror with Puddle Lamp & Off-Roading LED floods for '92-96 F-series & Br...

VentShades.JPG
572 hits | 78.61 KB | Posted: 5/31/15
AVS VentShades 12068 stainless screw from eBay

Thes...

Husky23003Cargo.jpg
785 hits | 122.5 KB | Posted: 9/19/14
Husky 23003 Cargo Liner (tan; gray is 23002)

I don't know exactly when production stopped, but appa...

USBpwr.JPG
616 hits | 133.48 KB | Posted: 9/15/14
The guts of a 4.8Amp USB power adapter will be mounted in the dash and controlled by a switch for ch...

StrgWh98Nav.JPG
1064 hits | 145.54 KB | Posted: 9/16/14
'98 Navigator Steering Wheel, airbag, & clock spring with pigtails

Using the PAC SWI-RC or -JACK, t...

PAC-SWI-JACK.JPG
701 hits | 79.02 KB | Posted: 7/23/15
PAC SWI-JACK

This will allow the Navigator steering wheel's buttons to control the Kenwood KDC-X998...

KDC-X998.JPG
1147 hits | 124.19 KB | Posted: 9/15/14
Kenwood KDC-X998

I'll use a PAC SWI-RC or -JACK to ...

KnwdWrgAd.JPG
1319 hits | 81.6 KB | Posted: 7/23/15
Kenwood connector spliced to common aftermarket connectors ([url=https://www.amazon.com/dp/B0002BF0B...

ParkSnsrs.JPG
651 hits | 130.02 KB | Posted: 9/15/14
Directed Electronics (DEI) 9401T park sensor systems for front & rear bumpers

[url=http://www.super...

Camera.JPG
601 hits | 77.9 KB | Posted: 5/31/15
Rear View Safety camera kit

I may swap to a different camera - a flush-mount version.

SeatHeaters.JPG
511 hits | 80.93 KB | Posted: 5/31/15
Seat Heater Kits from eBay

The seller tried to stiff me after offering 2 kits & shipping only 1, bu...

TGwthrblts.JPG
560 hits | 101.74 KB | Posted: 9/15/14
Aftermarket repro tailgate weatherbelt set

GrilleChrBk.JPG
710 hits | 120.83 KB | Posted: 9/15/14
Aftermarket repro chrome & black grille

F6TZ-8200-AAA Grille argent
F4TZ-8200-A Grille chrome
F4TZ-...

BodyMounts4-4109G.jpg
1366 hits | 130.7 KB | Posted: 9/18/14
Energy 4.4109 Body Mount Kit contains 8x 4030 bushings which fit the 6x 4031s, but none to fit the 2...

EnergySwayShock.JPG
1501 hits | 84.17 KB | Posted: 7/23/15
Front & rear sway bar bushings, shock bushings, and tie rod end boots for '92-96 Bronco w/quad front...

Energy4.7110G.JPG
1428 hits | 104.72 KB | Posted: 7/27/15
Energy Radius Arm Bushing Set 4.7110G

[url=http://www.supermotors.net/registry/media/789835][img]ht...

AxlePvts.JPG
1409 hits | 127.22 KB | Posted: 9/15/14
Energy 4.3133G D44IFS axle pivot bushings fit all D44IFS ('80-96 1/2-ton) & D50IFS.

[url=https://ww...

Energy4.2140G.JPG
988 hits | 81.86 KB | Posted: 7/7/15
This black Energy Polyurethane kit (4.2140G) contain...

Undercoating.JPG
738 hits | 64.76 KB | Posted: 5/31/15
Rustoleum Automotive Undercoating from WalMart

I used about 5 cans on the frame.

[url=https://www....

ValsparGray.JPG
616 hits | 97.77 KB | Posted: 3/13/15
Valspar Ford Gray Implement Paint is much lighter than Ford automotive gray

BM1Bolt.JPG
1513 hits | 117.5 KB | Posted: 4/17/15
The front body mount (core support) bolts were too far gone, so I bought some new ones. N800442-S436...

ExhManBolt.JPG
1409 hits | 130.72 KB | Posted: 4/17/15
One of the exhaust manifold bolts broke, and rather than try to get another at the JY, I bought a ne...

CoolantTube.JPG
686 hits | 107 KB | Posted: 9/16/14
'92 E4OD Coolant Tube

BumperPlates.JPG
639 hits | 120.96 KB | Posted: 9/16/14
'92-96 Bronco front bumper plates

Saginaw88.JPG
936 hits | 127.42 KB | Posted: 9/16/14
'88 5.0L E150 Saginaw

Those are the large bolts (M10, 13mm head), so I'll have to drill out my comp...

Stuff.JPG
637 hits | 129.41 KB | Posted: 9/16/14
Emblems, fender shims, radio connectors, HomeLink & pigtail, manual... All in a battery cover.

BatteryBox.JPG
679 hits | 120.06 KB | Posted: 9/17/14
I wish I knew what vehicle this battery cover was from - I'd love to snag a few more for other proje...

BrkHoseB.jpg
1110 hits | 56.75 KB | Posted: 3/23/16
Before I washed & wire-brushed it, this was a grimy old junkyard part. I prefer this to a new Chine...

BrakeHdwr.jpg
1100 hits | 65.75 KB | Posted: 6/11/16
The autoadjusters are available new, but they're expensive. The left always has 1 ring cut near its...

McGardLugs.jpg
688 hits | 89.99 KB | Posted: 6/11/16
McGard is the OEM for '92-96 Bronco spare locks, so they might be OEM for lug nuts. But even if they...

PedalPwr.JPG
687 hits | 174.86 KB | Posted: 1/30/16
Custom-made Power Adjustable Memory Pedals

MirMeo.jpg
669 hits | 77.39 KB | Posted: 4/23/15
I pulled a pair of mirror memory motors & wiring harnesses from an '01 Navigator. They fit directly...

Cowl96.JPG
767 hits | 115.72 KB | Posted: 4/24/15
'96-97 Left Cowl Plug F6TB-15020A51-AA

Receiver.JPG
884 hits | 147.02 KB | Posted: 2/3/15
JY hitch receiver Eaz-Lift V5

I chose this one because of how high the receiver is (close to the bu...

Receiver08.JPG
653 hits | 128.3 KB | Posted: 4/28/15
The hitch receiver's rear bolt holes line up with the previously-drilled holes in the frame, and the...

Fumoto106.jpg
1058 hits | 63.55 KB | Posted: 3/13/15
This Fumoto F106 fits [url=https://www.fumotooildrai...

BumpeR90.JPG
785 hits | 153.98 KB | Posted: 4/17/15
I stumbled across this pristine '87-91-style XLT bumper, and couldn't pass it up. The rub strips wi...

BumpeR90c.JPG
706 hits | 143.37 KB | Posted: 4/18/15
I prefer the later top pad, which overhangs the top edges and includes the license plate screw holes...

PCV97.JPG
3965 hits | 126.25 KB | Posted: 4/17/15
In addition to the actual revised PCV parts, I also got the revised vacuum nipples. This short hose...

PCV93.JPG
2464 hits | 112.06 KB | Posted: 4/18/15
The revised vacuum nipples have the single (larger) at the front for the PCV, and the tree (longer) ...

Y-pipe.JPG
1320 hits | 112 KB | Posted: 10/23/15
New Davico 14412N Direct-Fit Catalytic Converter As...

Walker35574a.JPG
1147 hits | 73.28 KB | Posted: 10/4/16
Walker 35574 secondary air repair tube & hose

[url=http://www.supermotors.net/registry/media/110419...

DY-731.jpg
580 hits | 38.76 KB | Posted: 12/3/15
This is only being replaced because the original was seized in the Y-pipe, so its threads stripped c...

ExFlange1.jpg
1076 hits | 85.93 KB | Posted: 10/27/15
I hate U-clamps, so I'm building flanges to bolt the muffler on, like a '96 Bronco's. I'll use the ...

Walker22798.jpg
969 hits | 82.16 KB | Posted: 11/25/15
Walker 22798 Stainless Steel Muffler made in USA is...

ExHanger.jpg
647 hits | 67.5 KB | Posted: 12/31/15
To match the stainless muffler, I built a stainless hanger from some 3/8" rod and a sheared str...

SiliconeVac.jpg
3146 hits | 55.28 KB | Posted: 6/11/16
Instead of relying on the antique hard-plastic vacuum lines or new vulcanized rubber, I collected se...

Cont5003a.jpg
708 hits | 64.1 KB | Posted: 4/9/19
Continental 5003 Hi-Miler Nomex/EPDM (someti...