20170521_142336.jpg
91 hits | 44.24 KB | Posted: 5/21/17
Speedometer needle is no where to be found!

20170521_142318.jpg
88 hits | 41.32 KB | Posted: 5/21/17
Removed dash pad

20170521_143223.jpg
89 hits | 38.93 KB | Posted: 5/21/17
Instrument surround removed

20170521_143855.jpg
87 hits | 29.74 KB | Posted: 5/21/17
F150?

20170521_144102.jpg
93 hits | 43.34 KB | Posted: 5/21/17
Instrument cluster removed

20170521_144616.jpg
90 hits | 41.84 KB | Posted: 5/21/17
Teaser shot. Will also have two guages to the left, and two to the lower right

20170524_174445.jpg
69 hits | 47.54 KB | Posted: 5/25/17
Mock up

20170524_174551.jpg
77 hits | 44.39 KB | Posted: 5/25/17
From the side

20170527_131051.jpg
56 hits | 36.26 KB | Posted: 5/27/17
Calipers make layout easy

20170527_140116.jpg
65 hits | 20.83 KB | Posted: 5/27/17
Action shot

20170527_141126.jpg
75 hits | 25.01 KB | Posted: 5/27/17
Layout for the box bends and cuts

20170527_141931.jpg
75 hits | 38.29 KB | Posted: 5/27/17
Box ready to be bent up.

20170527_142956.jpg
78 hits | 46.71 KB | Posted: 5/27/17
Sides bent using HF brake

20170527_145030.jpg
80 hits | 47.68 KB | Posted: 5/27/17
Ends bent using a vise, and a hammer and anvil

20170527_151017.jpg
91 hits | 45.78 KB | Posted: 5/27/17
Fitting into position

20170527_151047.jpg
79 hits | 41.29 KB | Posted: 5/27/17
Fitting the top mounting flange

20170527_151351.jpg
87 hits | 39.24 KB | Posted: 5/27/17

20170527_151112.jpg
94 hits | 39.18 KB | Posted: 5/27/17
Front view

20170528_075911.jpg
83 hits | 32.98 KB | Posted: 5/28/17
3 3/8 holes drilled

20170528_102428.jpg
43 hits | 33.75 KB | Posted: 5/28/17
All 5 holes cut

20170528_110256.jpg
54 hits | 32.44 KB | Posted: 5/28/17
Top plate welded on

20170528_110303.jpg
55 hits | 30.37 KB | Posted: 5/28/17
Top plate again

20170528_110933.jpg
60 hits | 36.3 KB | Posted: 5/28/17
Top mount welded on

20170528_110943.jpg
45 hits | 32.61 KB | Posted: 5/28/17
Top mount again

20170528_113025.jpg
56 hits | 27.86 KB | Posted: 5/28/17
Side plate welded on

20170528_124829.jpg
72 hits | 36.15 KB | Posted: 5/28/17
The other side plate

20170528_124843.jpg
80 hits | 35.42 KB | Posted: 5/28/17
Bottom mounts

20170528_124916.jpg
77 hits | 37.64 KB | Posted: 5/28/17
Completed panel, minus moutnting holes.

20170528_130026.jpg
69 hits | 37.46 KB | Posted: 5/28/17
Layout fluid

20170528_130040.jpg
97 hits | 32.55 KB | Posted: 5/28/17
Dykem on the captive nuts to transfer to gauge panel.

20170528_130113.jpg
75 hits | 33.67 KB | Posted: 5/28/17
All nut locations transfered and drilled.

20170528_130440.jpg
79 hits | 39.44 KB | Posted: 5/28/17
Mounted

20170528_130550.jpg
85 hits | 40.58 KB | Posted: 5/28/17
Dash surround on

20170528_130705.jpg
74 hits | 42.57 KB | Posted: 5/28/17
Gauges slid in

20170610_122544.jpg
71 hits | 44.45 KB | Posted: 6/10/17
Warning lights and blinkers positioned and drilled

20170610_101634.jpg
59 hits | 26.89 KB | Posted: 6/10/17
Parts for the gauge pods

20170610_113233.jpg
41 hits | 36.93 KB | Posted: 6/10/17
Pods getting fabricated

20170610_113426.jpg
80 hits | 44.01 KB | Posted: 6/10/17
Technique for floating the gauge mounting ring

20170610_114119.jpg
73 hits | 43.02 KB | Posted: 6/10/17
Welds for mounting ring

20170610_115123.jpg
54 hits | 32.35 KB | Posted: 6/10/17
Pods fabricated.

20170610_154753.jpg
65 hits | 40.66 KB | Posted: 6/10/17

20170611_120143.jpg
72 hits | 75.16 KB | Posted: 6/12/17
Left side pods

20170611_120136.jpg
59 hits | 76.58 KB | Posted: 6/12/17

20170611_120130.jpg
67 hits | 81.18 KB | Posted: 6/12/17

20170611_112553.jpg
81 hits | 43.5 KB | Posted: 6/12/17
Test fit before welding the pods together

20170611_120109.jpg
66 hits | 66.25 KB | Posted: 6/12/17

20170611_120119.jpg
71 hits | 67.47 KB | Posted: 6/12/17

20170827_082702.jpg
50 hits | 82.23 KB | Posted: 8/27/17
All gauge pods done, and painted.

20170827_082620.jpg
40 hits | 60.23 KB | Posted: 8/27/17

20170903_091949.jpg
65 hits | 69 KB | Posted: 9/4/17

20170903_113605.jpg
70 hits | 79.81 KB | Posted: 9/4/17

20170904_134000.jpg
59 hits | 68.38 KB | Posted: 9/4/17

20170905_175851.jpg
57 hits | 63.05 KB | Posted: 9/6/17

20170905_180004.jpg
65 hits | 53.45 KB | Posted: 9/6/17
Bottom

20170905_180016.jpg
76 hits | 58.31 KB | Posted: 9/6/17
Top

20170906_183942.jpg
73 hits | 63.05 KB | Posted: 9/6/17
Custom wiring diagram.

20170909_135054.jpg
82 hits | 77.37 KB | Posted: 9/10/17
Oil take-off for psi and a warning light

20170910_094024.jpg
83 hits | 63.71 KB | Posted: 9/10/17
Old wires separated into ones that I'll reuse and ones I wont

20170915_151524.jpg
41 hits | 57.6 KB | Posted: 9/15/17
Water temp sensor manifold

20170915_152531.jpg
40 hits | 59.11 KB | Posted: 9/15/17
With warning light sensor

20170915_160426.jpg
60 hits | 82.55 KB | Posted: 9/15/17
Installed

20170915_160536.jpg
42 hits | 82.12 KB | Posted: 9/15/17

20170915_160624.jpg
43 hits | 60.88 KB | Posted: 9/15/17

20170915_162632.jpg
57 hits | 81.79 KB | Posted: 9/15/17

20170915_163410.jpg
82 hits | 89.93 KB | Posted: 9/15/17

20170915_160759.jpg
53 hits | 73.03 KB | Posted: 9/15/17

20170920_180715.jpg
48 hits | 72.86 KB | Posted: 9/20/17
Pile of spaghetti

20170920_182714.jpg
39 hits | 66.88 KB | Posted: 9/20/17

20170921_162830.jpg
73 hits | 58.12 KB | Posted: 9/21/17
GPS antenna placement... except I was a foot short. So I moved it to the other side.

20170921_181650.jpg
37 hits | 62.47 KB | Posted: 9/21/17

20170921_181714.jpg
41 hits | 62.32 KB | Posted: 9/21/17

20170921_181805.jpg
39 hits | 79.28 KB | Posted: 9/21/17

20170929_170620.jpg
51 hits | 75.9 KB | Posted: 9/30/17
Primer for dash surround

20170930_100140.jpg
46 hits | 54.25 KB | Posted: 9/30/17
Paint for dash surround

20171004_164714.jpg
40 hits | 90.14 KB | Posted: 10/4/17

20171004_164800.jpg
58 hits | 70.54 KB | Posted: 10/4/17

20171004_164824.jpg
47 hits | 106.13 KB | Posted: 10/4/17

20171018_174505.jpg
36 hits | 50.22 KB | Posted: 10/18/17
Stock 4x4 indicator lamp needs a place to go

20171018_174512.jpg
46 hits | 47.42 KB | Posted: 10/18/17
4x4 lamp bracket

20171018_174552.jpg
41 hits | 55.09 KB | Posted: 10/18/17

20171018_174923.jpg
33 hits | 52.02 KB | Posted: 10/18/17

20171018_174945.jpg
43 hits | 50.42 KB | Posted: 10/18/17

20171018_180207.jpg
50 hits | 60.76 KB | Posted: 10/18/17

20171018_180312.jpg
41 hits | 66.49 KB | Posted: 10/18/17

20171018_180344.jpg
54 hits | 50.16 KB | Posted: 10/18/17

20171018_180417.jpg
87 hits | 57.07 KB | Posted: 10/18/17

20171018_180442.jpg
78 hits | 55.08 KB | Posted: 10/18/17

20171024_154316.jpg
74 hits | 89.93 KB | Posted: 10/24/17

20171024_154342.jpg
52 hits | 81.54 KB | Posted: 10/24/17

20171226_154537.jpg
53 hits | 82.31 KB | Posted: 12/26/17
Finished!

20171226_154707.jpg
45 hits | 42.52 KB | Posted: 12/26/17

20171226_154935.jpg
50 hits | 78.74 KB | Posted: 12/26/17

20171226_155008.jpg
58 hits | 69.89 KB | Posted: 12/26/17

20171226_155944.jpg
90 hits | 61 KB | Posted: 12/26/17

20180128_094259.jpg
42 hits | 104.18 KB | Posted: 1/28/18

20180128_094403.jpg
41 hits | 83.09 KB | Posted: 1/28/18

20190414_072407.jpg
31 hits | 85.58 KB | Posted: 4/14/19

20190414_072419.jpg
35 hits | 83.16 KB | Posted: 4/14/19