Carpet OE.jpg
1523 hits | 59.27 KB | Posted: 5/6/09
Original Carpet & Trim

Because of the cage & chair bases, the carpet for this truck will have to ...

CarpetOE.jpg
1294 hits | 44.16 KB | Posted: 5/6/09
Original Carpet

Because of the cage & chair bases, the carpet for this truck will have to be mo...

CarpetB1.JPG
1587 hits | 70.16 KB | Posted: 5/6/09
Straight out of the box, I can see there will be problems. The carpet is too wide between the wheel...

CarpetB2.JPG
1323 hits | 64.05 KB | Posted: 5/6/09
These don't appear to be strong enough to hold the carpet in place; much less wrinkle-free. And the...

CarpetB3.JPG
1334 hits | 93.92 KB | Posted: 5/6/09
The corners have plenty, even if I wasn't about to unbind them & cut out for the cage.

CarpetB4.JPG
4574 hits | 28.98 KB | Posted: 5/6/09
The wheelwell carpeting is very loose and doesn't follow the contours well. But the way I've instal...

CarpetB5.JPG
2791 hits | 61.42 KB | Posted: 5/6/09
The cargo area is done, other than possibly cutting the middle down & rebinding the corners.

CarpetF1.JPG
1464 hits | 40.33 KB | Posted: 5/6/09
Front carpet is next. The first step is to cut it down the middle.

CarpetF2.JPG
1468 hits | 39.41 KB | Posted: 5/6/09
Front carpet is next. The first step is to cut it down the middle.

CarpetF3.JPG
1409 hits | 53.17 KB | Posted: 5/7/09
Because of the modifications to the floor, and the fact that we're planning a large floor console, a...

CarpetF4.JPG
1847 hits | 56.74 KB | Posted: 5/7/09
After some fitting, the R side went in fairly well. The edges still need to be bound, and I'll prob...

CarpetF7.JPG
2362 hits | 69.86 KB | Posted: 5/7/09
The L side took more work, of course, but it came out about the way I imagined. When the outer edge...

CarpetF9.JPG
2362 hits | 66.18 KB | Posted: 5/7/09
Despite a few molding wrinkles, it seems to fit better than any of the rear pieces. I still have to...

CarpetF10.JPG
2369 hits | 66 KB | Posted: 5/7/09
Now that the carpet is in (even with the big gash down the middle), the A/C ducts are now the bigges...

ShoulderBelt.JPG
5137 hits | 53.99 KB | Posted: 9/13/09
Even with tilt/slide seats, access to the back is difficult. But the shoulder belts, speakers, & li...

PassSeatBase.JPG
2674 hits | 41.19 KB | Posted: 9/11/09
The passenger seat base is carpeted on its outboard face. I used an '86 EB Bronco captain's chair a...

Kicks.JPG
2858 hits | 29.67 KB | Posted: 9/11/09
Kick panel carpet is attached with snaps.

TG1.JPG
1715 hits | 62.5 KB | Posted: 9/13/09
Rather than the bulky eyesore tracks, we chose to attach the t/g carpet with snaps. Frank doesn't e...

TG2.JPG
1804 hits | 41.75 KB | Posted: 9/13/09
It's tight enough to stay flat, but I've since added 3 snaps across the top & 2 more at the bottom.