300ci I6 --DEAD!
----I threw rod...the 3rd I6 I have killed in this truck.
----As soon as I source a Cummins 4bt or an Isuzu 4bd, that's what its gonna have.
----And all the I6 goodies below will be on ebay!
Clifford Water-Heated Intake
Dual outlet headers and dual exhaust
2bbl carb
Custom snorkel intake using conical K&N filter
On-board air
Underhood toolbox
AGR powersteering pump (it's OK)
Auto tranny cooler used as a power steering fluid cooler
Drivetrain:
NP435 manual trans (or T18...I never am sure)
NP208 transfer case
Ford 9" reassembled with a drain plug
Solid Dana 44 in front
Spool and 5.14's in the 9",
ARB and 5.13's for the SOLID Dana 44
37x12.5x15 Super Swamper SSR's in front
37x13x15 Super Swamper Boggers in back
-each of the 4 tires contain 8 golf balls for dynamic balancing
37x12.5x15 Super Swamper SSR spare.
Notes:
The nickname (Odey) is because when I bought the truck,
the F and R were missing from the FORD on the hood...O...D.
ADDITIONAL MODS
Front receiver hitch w/ a skidplate
shackle flip
dual shocks in back,
-but only one set in there right now
no sway bars
Ryan-spawned lengthened radius arms
fender trimming to remove rust / clear tires
in-cab timing retarding
-think it works, need to prove it
half doors
partial waterproofing
-drivetrain vents moved
-snorkel intake
-clutched fan
-water-resistant distributer
TireGate Clone...nice!
Does a trailer for hauling it on count as a modification? Maybe an accessory?
Still have:
NEW ENGINE!
more fender & body work to do
roll cage
more lights (rock lights, fog lights, etc)
on and on and on!
SOME PICTURES WERE LOST AT ONE POINT, IF THERE IS SOMETHING YOU WANT TO SEE FROM MY MODS THAT I DON'T HAVE A PICTURE UP FOR, LET ME KNOW AND I WILL GET IT POSTED.
5th Gear Fix2.jpg 10 hits | 50.52 KB | Posted: 6/2/09 Oh how, oh how shall I fix my Dodge NV4500 5th gear?
DennyK New Acid Base Quick Reference.jpg 21 hits | 33.37 KB | Posted: 5/4/09 An Improved Quick Reference Guide for the Homebrew Acid-Base method created by Infopop's DKenny using a variable-catalyst method that still retains 'homebrew' quantities of methanol and works with a wide range of poor quality oils. The Improved Curv...
CIMG1747.JPG 14 hits | 29.04 KB | Posted: 4/19/09 Might get me this in trade for a trailer...cool...
bailout.jpg 33 hits | 90.94 KB | Posted: 12/11/08 Awe-man! I saw this, and had to snag it!
Killer Dowel Pin 001.jpg 27 hits | 40.07 KB | Posted: 11/30/08 Yeah, well, if you have a diesel Dodge, better patch that MF'er...I thought it was already done...I was wrong. 205,300 miles and I'm up a sh!t creek. At least I can still fix it!
Killer Dowel Pin 004.jpg 26 hits | 47.36 KB | Posted: 11/30/08 You've heard of the Killer Dowel Pin on a Cummins, right?
Killer Dowel Pin 010.jpg 25 hits | 65.21 KB | Posted: 11/30/08 Well...not BRONCO carnage...but I think this counts!
DennyK Acid Base Quick Reference.jpg 70 hits | 33.91 KB | Posted: 11/19/08 A Quick Reference Guide for the Homebrew Acid-Base method created by Infopop's DKenny using a variable-catalyst method that still retains 'homebrew' quantities of methanol and works with a wide range of poor quality oils.
Most Viewed Files
9in drain.jpg 843 hits | 62.62 KB | Posted: 8/11/03 I added a drain to the 9inch so I don't have to crack the third member to change the gear oil after the gear break-in. Plus more oil will drain out the hole plug than could drain from the bottom of the third member openning. There is a magnet in the...
headers.jpg 707 hits | 37.66 KB | Posted: 4/21/04 The Clifford dual-exit headers. Take note: The order matters, I believe the front one goes on first. Also, the factory paint is just paint and will burn off (causing LOTS of smoke) so either strip and repaint or be happy with the eventual rust col...
445incher.jpg 456 hits | 30.07 KB | Posted: 9/15/04 Slaughtered my previous largest musky record by 6.5 inches! This one tapes out to 44.5"! It was a slob-monster!
intake.jpg 440 hits | 38.13 KB | Posted: 4/21/04 This is the Clifford water-heated intake with the 2-bbl from a 351. Replaces the 1-bbl and exhaut heated stock intake
445incher2.jpg 421 hits | 39.19 KB | Posted: 9/15/04 I was seriously stoked!
skorkall.jpg 417 hits | 37.75 KB | Posted: 1/14/04 The whole external skorkel. Multiple braces so it doesn't wobble.
axle in front.jpg 368 hits | 55.21 KB | Posted: 8/11/03 Should look pretty cool when installed...duh!
