4x4-vacuum-line.jpg9366 hits | 65.81 KB | Posted: 2/7/05The red arrow indicates where the stock, rubber vacuum lines connect. The ends of mine were brittle...
yellow-hub-seal.jpg6898 hits | 50.68 KB | Posted: 2/7/05This is the yellow o-ring that seals the hub. Replacement is easy, it simply fits around the outsid...
Ford SuperDuty-Excursion loose ball joints.mp49466 hits | 1.89 MB | Posted: 9/26/052-part video that shows a loose lower ball joint installed and removed.
Part 1 of the video shows...
How to remove Dana 50 hub.mp46779 hits | 652.63 KB | Posted: 12/16/05This video clip shows how to remove the hub from a Dana 50 frontend off of an Excursion. This also a...
3a-Remove Ball Joints-Remove Hub c-clip.mp46202 hits | 675.74 KB | Posted: 9/11/06Removing the retaining/c-clip from the hub.
3b-Remove Ball Joints-Remove Hub.mp46393 hits | 990.82 KB | Posted: 9/11/06Removing the hub from the dana 50 front axle.
4a-Remove axle c-clip.mp45771 hits | 1.54 MB | Posted: 9/11/06Remove axle c-clip from dana 50 front axle.
4b-Remove washers.mp45613 hits | 655.33 KB | Posted: 9/11/06Remove the 3 washers from the dana 50 front axle.
4c-Remove drag link.mp45234 hits | 5.3 MB | Posted: 9/11/06Removing the drag link from the front end.
4d-Loosen bolts on lug nut backplate.mp45868 hits | 1.52 MB | Posted: 9/11/06Loosen the bolts behind the lug lugs the dana 50 (this is the hub assembly, which includes your bear...
4e-Unbolt ESOF line.mp44928 hits | 2.33 MB | Posted: 9/11/06Unbolt the electronic shift on-the-fly (ESOF) line.
4f-Unbolt ABS sensor.mp45178 hits | 1.81 MB | Posted: 9/11/06Unbolt the anti-lock brake sensor (ABS).
4g-Tap & pry lug nut plate loose.mp45504 hits | 4.45 MB | Posted: 9/11/06Tap and pry loose the lug plate.
5a-Remove knuckle:axle washer.mp45052 hits | 850.29 KB | Posted: 9/11/06Remove the knuckle/axle washer. Note the grooves face in towards the differential.
5b-Disconnect ESOF Vacuum Line.mp44751 hits | 1.92 MB | Posted: 9/11/06Disconnect the electronic shift on-the-fly (ESOF) vacuum line.
5c-Remove Axle shaft.mp46187 hits | 4.33 MB | Posted: 9/11/06Pry loose and remove axle shaft.
5d-Remove Cotter Pin.mp44979 hits | 4.44 MB | Posted: 9/11/06Remove cotter pin from the knuckle.
5e-Unbolt steering knuckle.mp45003 hits | 5.74 MB | Posted: 9/11/06Unbolt the steering knuckle.
6a-Remove c-clip.mp44597 hits | 2.68 MB | Posted: 9/11/06Remove the c-clip from the steering knuckle.
6b-Remove lower ball joint.mp45453 hits | 1.22 MB | Posted: 9/11/06Remove the lower ball joint with a BFH.
6c-Remove upper ball joint.mp46172 hits | 3.49 MB | Posted: 9/11/06Remove the upper ball joint with the proper ball joint removal tool and air tools!
7a-install upper ball joint.mp45599 hits | 2.29 MB | Posted: 9/11/06Using the ball joint press and air tools, install the new ball joints. This process is fairly straig...
8b-Inner seal.mp45611 hits | 2.52 MB | Posted: 9/11/06Remove and install the new inner axle seal. (Outer axle seal should be pressed in by a shop or deale...
9a-Reinstall Steering Knuckle.mp45296 hits | 7.6 MB | Posted: 9/11/06Reinstall the steering knuckle.
9b-Reinstall Axle shaft.mp45976 hits | 3.34 MB | Posted: 9/11/06Reinstall the axle shaft.
9c-Reinstall lug nut plate & hose:lines.mp44913 hits | 10.47 MB | Posted: 9/11/06Reinstall lug plate, hoses, and lines.
9d-Reinstall hub assembly & seal.mp45475 hits | 8.03 MB | Posted: 9/11/06Reinstall hub assembly and seal.
9e-Reinstall drag link.mp44737 hits | 3.65 MB | Posted: 9/11/06Reinstall drag link.
9f-Reinstall brakes.mp44840 hits | 5.37 MB | Posted: 9/11/06Reinstall brakes.