File 148 of 207
Prev | Next

Share This
Url
Tag
Img
Thumb

washer-jet-late.jpg Washer Jet

The windshield washer system has two windshield washer nozzle jet and brackets (17603) located on the cowl vent screens (018A16). 
The washer system is activated by pushing in on the outboard end of the multi-function switch (13K359). 
This action energizes a windshield washer pump (17664) mounted inside a cavity in the windshield washer reservoir (17618 ). 
The windshield washer reservoir is mounted on the fender apron. 
If multi-function switch is in OFF or INT position, windshield wiper will run as long as knob is pushed in. When the knob is released, washers will stop immediately, but windshield wipers will continue to run for three to four cycles before returning to OFF or interval operation. 
If the multi-function switch is in LO or HI position, washers operate with no change in windshield wiper operation.

NOTE: The windshield washer nozzle jet and bracket sprays windshield washer fluid in a fan-like pattern onto the windshield glass (03100), but the jet is actually a single oscillating stream. Only actuate the system momentarily to avoid sending more fluid than needed through the system. 

The windshield washer nozzle jet and bracket is not adjustable, and is mounted to the cowl vent screens.
washer-jet-late.jpg | Hits: 2878 | Posted on: 12/4/04 | View original size (28.1 KB)

Washer Jet

The windshield washer system has two windshield washer nozzle jet and brackets (17603) located on the cowl vent screens (018A16).
The washer system is activated by pushing in on the outboard end of the multi-function switch (13K359).
This action energizes a windshield washer pump (17664) mounted inside a cavity in the windshield washer reservoir (17618 ).
The windshield washer reservoir is mounted on the fender apron.
If multi-function switch is in OFF or INT position, windshield wiper will run as long as knob is pushed in. When the knob is released, washers will stop immediately, but windshield wipers will continue to run for three to four cycles before returning to OFF or interval operation.
If the multi-function switch is in LO or HI position, washers operate with no change in windshield wiper operation.

NOTE: The windshield washer nozzle jet and bracket sprays windshield washer fluid in a fan-like pattern onto the windshield glass (03100), but the jet is actually a single oscillating stream. Only actuate the system momentarily to avoid sending more fluid than needed through the system.

The windshield washer nozzle jet and bracket is not adjustable, and is mounted to the cowl vent screens.
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2024 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog