|
3. Install and seat camshaft cap cluster assemblies. Hand-start 14 bolts.
NOTE: Each camshaft cap cluster assembly is tightened individually.
4. Tighten camshaft cap cluster retaining bolts in sequence to 8-12 N-m (6.0-8.8 lb-ft).
5. Loosen 14 camshaft cap cluster retaining bolts approximately two turns or until head of bolt is free.
NOTE: Camshaft should turn freely with a slight drag.
6. Retighten all bolts in sequence to 8-12 N-m (6.0-8.8 lb-ft).
7. Check camshaft end play using Rotunda Dial Indicator with Bracketry 014-00282 or equivalent.
|