|
|
This was for doing my Tie Rod End Flip. It places the TREs on the top of the knuckle instead of the bottom which raises them about 3" and can really help the strenght of your steering if you have a lift but no drop pitman arm. If you arn't doing the TRE Flip you can ignore the next few pictures.
Using a Reamer with 1-1/2" Taper AKA 7.15* Degree Taper, you ream the top of the hole till you can fit the TRE Conversion Sleeves all the way in. I bought the reamer on ebay for about 60$ shipping and i bought the conversion sleaves from JBG. Use cutting oil when reaming to prevent burning it up and go slowly.
|
