Factory.jpg
606 hits | 98.01 KB | Posted: 10/22/06
Factory plastic piece of shit

Remove.JPG
508 hits | 107.27 KB | Posted: 10/12/06
The lock broke on the plastic stock POS console, so I decided to build a (hopefully) better one. Th...

Rough Sketch.JPG
908 hits | 72.13 KB | Posted: 10/12/06
I just threw some dimensions down to figure out the board foot I was going to need for the Red Oak I...

Template.JPG
541 hits | 91.5 KB | Posted: 10/12/06
I deviated from the template when I decided to cut the sides. This was mainly used to get the conto...

Sides.JPG
553 hits | 100.51 KB | Posted: 10/12/06
This is 3/4" Birch plywood. I used a jigsaw to cut out the bottom and a band saw to cut the top.

Close Side.JPG
434 hits | 87.09 KB | Posted: 10/12/06
Just a close up of the drivers side.

Cleated Inside.JPG
496 hits | 92.57 KB | Posted: 10/12/06
This is some scrap 3/4" X 3/4" Red Oak that will be used to screw the top panels on from underneath....

Passenger side.jpg
606 hits | 85.07 KB | Posted: 10/16/06
Passenger side assembled, and waiting for sanding and finishing.

Front.JPG
547 hits | 87.93 KB | Posted: 10/16/06
Here's the front.

Drivers side.JPG
488 hits | 97.87 KB | Posted: 10/16/06
And the drivers side

Lid.JPG
440 hits | 94.3 KB | Posted: 10/16/06
This is the lid just resting on top.

Lid2.JPG
474 hits | 87.91 KB | Posted: 10/16/06
Another shot of the lid resting on top.

Front Halfway Sanded.jpg
482 hits | 73.58 KB | Posted: 10/18/06

Hinges mounted.jpg
451 hits | 77.08 KB | Posted: 10/18/06

Closeup hinges.jpg
479 hits | 86.95 KB | Posted: 10/18/06

Top half opened.jpg
474 hits | 79.37 KB | Posted: 10/18/06

Closeup tray.jpg
432 hits | 79 KB | Posted: 10/18/06

1 Coat of stain.jpg
456 hits | 91.37 KB | Posted: 10/20/06
Minwax Color "Golden Oak #210B"

1 Coat of Stain2.jpg
439 hits | 93.71 KB | Posted: 10/20/06
Minwax Color "Golden Oak #210B"

1 Coat of Stain3.jpg
438 hits | 99.09 KB | Posted: 10/20/06
Minwax Color "Golden Oak #210B"

1 Coat of Stain4.jpg
414 hits | 98.17 KB | Posted: 10/20/06
Minwax Color "Golden Oak #210B"

3 Coats Poly.jpg
495 hits | 99.13 KB | Posted: 10/21/06

3 Coats Poly2.jpg
517 hits | 101.96 KB | Posted: 10/21/06

3 Coats Poly3.jpg
484 hits | 98.07 KB | Posted: 10/21/06

Cup Holders.jpg
563 hits | 102.5 KB | Posted: 10/22/06
Here's the cupholders and aux. cigarette lighter installed

Pass Side.jpg
678 hits | 91.44 KB | Posted: 10/22/06
Shot of the Passenger side

Drive Side.jpg
691 hits | 92.76 KB | Posted: 10/22/06
Shot of the Drivers side

4 Low.jpg
659 hits | 94.69 KB | Posted: 10/22/06
I made sure there was no problems getting the transfer case into 4 Low

IMGP0567.jpg
531 hits | 113.03 KB | Posted: 10/22/06
Two small brackets I had in the garage that originally went to who knows what (????)

IMGP0568.jpg
528 hits | 104.01 KB | Posted: 10/22/06
Mounted to the bottom with a hole or two drilled in them

IMGP0569.jpg
459 hits | 103.29 KB | Posted: 10/22/06
Used OEM bolts and original mounting holes

IMGP0570.jpg
482 hits | 96.65 KB | Posted: 10/22/06
All covered up by the floor

Factory1.jpg
676 hits | 97.69 KB | Posted: 10/22/06
Factory piece of shit # 2