IMG_0543.JPG 2320 hits | 45.03 KB | Posted: 6/25/04 AOD filter kits finally came down 40% in price from last year. You get rubber gasket (re-usable), s...
IMG_0044.JPG 2128 hits | 58.71 KB | Posted: 7/3/05 Update. This sucker has dropped in price again ! $12 CDN this year. NAPA part number is V 58949
IMG_0548.JPG 2587 hits | 50.97 KB | Posted: 6/25/04 What a treat being able to use this drain plug I welded in last year, instead of getting the red hai...
IMG_0571.JPG 1917 hits | 77.65 KB | Posted: 6/26/04 All the bolts, except the two middle rear ones, are easy to get to with a 10mm socket. I use a clutc...
IMG_0582.JPG 1919 hits | 62.82 KB | Posted: 6/26/04 These two middle rear bolts are a real treat to get to. Ford engineers should get a sound beating f...
IMG_0058.JPG 1815 hits | 83.37 KB | Posted: 7/3/05 This year I discovered this combination of tools is even easier to reach those two difficult to get ...
IMG_0052.JPG 1957 hits | 73.41 KB | Posted: 7/3/05 Now just undo the three 8mm head bolts and note that they are NOT that tight. Remember this when you...
IMG_0592.JPG 2219 hits | 51.9 KB | Posted: 6/25/04 That external remote filter is really doing it's job. This is what the pan and fluid looked like aft...
IMG_0584.JPG 2134 hits | 62.66 KB | Posted: 6/25/04 Here's the valvebody without the filter on it. Note the round snout there. That's the one people tel...
IMG_0586.JPG 2320 hits | 69.11 KB | Posted: 6/26/04 Ever wonder how far your dipstick goes into the transmission ? There it is, not far. Damn ! I should...
IMG_0590.JPG 2280 hits | 48.09 KB | Posted: 6/26/04 Speak of the devil, there it is. I stick the cork gasket on with a little sealant or glue just to h...
IMG_0046.JPG 1701 hits | 60.04 KB | Posted: 7/3/05 Dap a little sealant on the small square gasket just to keep it in place while you install the filte...
IMG_0050.JPG 1660 hits | 63.01 KB | Posted: 7/3/05 Wipe the excess sealant off right away, you don't want any fouling up the transmission.