Motor2 as it came.jpg
479 hits | 127.71 KB | Posted: 10/31/06

This was how she looked when i opened the hood. i had a lifter tick and the PO bought new lifters so...
MOTOR7.jpg
454 hits | 121.36 KB | Posted: 10/31/06

i started by removing the bolts that held the compressor in place and the air cleaner and PCV and fr...
MOTOR6.jpg
467 hits | 120.13 KB | Posted: 10/31/06

i moved the compressor off to the side it is still connected and i was told it works (i found out it...
MOTOR5.jpg
468 hits | 131.46 KB | Posted: 10/31/06

Off came the fuel line from the pump to the carb then the valve cover and lifter valley cover.
MOTOR4.jpg
497 hits | 127.26 KB | Posted: 10/31/06

I did one cylinder at a time and replaced all the lifters and 2 slightly bent push rods.
MOTOR3.jpg
482 hits | 120.25 KB | Posted: 10/31/06

new lifter installed and all tourqued back down. i cleaned and painted the lifter cover.
MOTOR2.jpg
521 hits | 121 KB | Posted: 10/31/06

another shot of the painted lifter cover. as i was replacing the plugs i found a few bad wires so ou...
MOTOR.jpg
476 hits | 123.47 KB | Posted: 10/31/06

Here she was all toghther and ready to return to the smog shop. i decided to clean and paint the val...

About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2024 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog