Photo0206.jpg 349 hits | 66.32 KB | Posted: 4/30/08 Fan from a 93-95 T Bird
Photo0208.jpg 321 hits | 26.2 KB | Posted: 4/30/08 Brackets for top and bottom (ones for bottom are on top in pic) Bottom bracket is 1/8 x 1 steel angl...
Photo0209.jpg 340 hits | 44.93 KB | Posted: 4/30/08 Here's most of the electronics:
Hayden relay kit 3653 (comes with temp switch, probe, 15ft of wire,...
Photo0214.jpg 392 hits | 48.31 KB | Posted: 4/30/08 Temp location for the temp switch. I waterproof box is to come.
Photo0213.jpg 312 hits | 45.29 KB | Posted: 4/30/08 Temporary location for the relay, on the fan shroud. Temp sender is located next to it. I put it o...
Photo0215.jpg 370 hits | 35.5 KB | Posted: 4/30/08 fan motor ground as well as relay ground.
Photo0212.jpg 321 hits | 33.23 KB | Posted: 4/30/08 Temp never reached above the middle. This is on a 73* day with AC on giving it lots of throttle. W...
Photo0218.jpg 299 hits | 28.65 KB | Posted: 5/5/08 LEDs, resistors and a project box to keep it all in.
Photo0219.jpg 319 hits | 55.49 KB | Posted: 5/6/08 final spot for all the electronics under the hood.
Photo0226.jpg 270 hits | 52.24 KB | Posted: 5/16/08 added 2 switches inside, power came from the locker's constant 12v, grounded under dash
Photo0227.jpg 291 hits | 33.7 KB | Posted: 5/16/08 this switch controls the low speed, turn it off for water crossings or leave it on to let the thermo...
Photo0228.jpg 302 hits | 48.54 KB | Posted: 5/16/08 extra 2 holes will be made here.
Photo0229.jpg 357 hits | 49.86 KB | Posted: 5/16/08 fan get's it's power straight from the alt d-block