Damon Haas > 1994 Ford Bronco > open folder re-reworked rear shocks

after the one ton swap, i wasnt getting the rear flex i wanted, so I made these from 1.5x3 angle iro...
roughypieces.jpg
1028 hits | 19.53 KB | Posted: 4/25/04
after the one ton swap, i wasnt getting the rear flex i wanted, so I made these from 1.5x3 angle iro...
welded on a pice of angle on outside, so it only takes two .5" bolts to mount them together. Drille...
roughtogether.jpg
878 hits | 17.44 KB | Posted: 4/25/04
welded on a pice of angle on outside, so it only takes two .5" bolts to mount them together. Drille...
the top of the angle is close to the uderside of the body, thats why its in two pieces. Has to be b...
upinthererough.jpg
1023 hits | 71.96 KB | Posted: 4/25/04
the top of the angle is close to the uderside of the body, thats why its in two pieces. Has to be b...
one of these pieces welded on either side to mount the bracket. I am still working on my welding a...
passmounted.jpg
964 hits | 47.25 KB | Posted: 4/25/04
one of these pieces welded on either side to mount the bracket. I am still working on my welding a...
these are the front shock mounts from a ttb that were cut and booger welded on (best I could do vert...
passlower.jpg
1067 hits | 69.75 KB | Posted: 4/25/04
these are the front shock mounts from a ttb that were cut and booger welded on (best I could do vert...
this is mounted up in there, painted, and flexed as in the following pics. the stuffed tire is hitt...
mounted:flexed.jpg
1029 hits | 71.64 KB | Posted: 4/25/04
this is mounted up in there, painted, and flexed as in the following pics. the stuffed tire is hitt...
best flex i could find when i finished the work. All tires are firmly on the ground, but without un...
passflex.jpg
1045 hits | 57.32 KB | Posted: 4/25/04
best flex i could find when i finished the work. All tires are firmly on the ground, but without un...
the 40 is fully stuffed, and hitting the inside fender well. it clears perfectly around the fender ...
40stuffed.jpg
986 hits | 58.97 KB | Posted: 4/25/04
the 40 is fully stuffed, and hitting the inside fender well. it clears perfectly around the fender ...
again, all tires firmly on the ground and no where near lift. the front tire is about 36" off the g...
dsideflex.jpg
980 hits | 62.45 KB | Posted: 4/25/04
again, all tires firmly on the ground and no where near lift. the front tire is about 36" off the g...
I reworked the front shocks while doing the dual batts and exhaust. the front is no where near comi...
driverside.jpg
1040 hits | 43.44 KB | Posted: 5/13/04
I reworked the front shocks while doing the dual batts and exhaust. the front is no where near comi...
since I put the heims in, I still need to adjust it some, as this tire is hitting a lot on the bumpe...
passstuff.jpg
900 hits | 40.15 KB | Posted: 5/13/04
since I put the heims in, I still need to adjust it some, as this tire is hitting a lot on the bumpe...
same shot, further back
passstuff2.jpg
873 hits | 33.03 KB | Posted: 5/13/04
same shot, further back
thought I would get more flex, but it seems there is another bind instead of the shocks. Its the da...
dsidedrop.jpg
908 hits | 57.45 KB | Posted: 5/13/04
thought I would get more flex, but it seems there is another bind instead of the shocks. Its the da...
Guess Ill have to rework that now.
hangerhits.jpg
984 hits | 50.82 KB | Posted: 5/13/04
Guess Ill have to rework that now.
about 4 inches off the ground, but hard to tell
offtheground.jpg
935 hits | 56.71 KB | Posted: 5/13/04
about 4 inches off the ground, but hard to tell