bottomcoilbracket.jpg
1364 hits | 63.96 KB | Posted: 2/25/05
wholes drilled. the bottom is drilled large to allow the head of a 5/8 bolt to fit. You do grind d...

weldedin.jpg
1275 hits | 45.21 KB | Posted: 2/25/05
Welded in place. I moved the center bolt back 1.5 inch and out 1.5 inch to help the coil sit more l...

groundsmooth.jpg
1244 hits | 72.23 KB | Posted: 2/25/05
ground smooth and ready for paint

newbracket.jpg
1441 hits | 74.13 KB | Posted: 2/25/05
ready for paint. Again, this bolt is now 1.5 inches back and out for better coil alignement.

newmountinstalled.jpg
1745 hits | 51.2 KB | Posted: 2/25/05
coil sits much better. I may use the old swaybar mounts to mount a new swaybar since I may go to th...

coilshot.jpg
1618 hits | 74.76 KB | Posted: 2/25/05
the coil sits much better. Cage builds 4.25 degrees of caster into the arms to help the coil sit fl...

passengerside.jpg
1606 hits | 52.67 KB | Posted: 2/25/05
Had to but weld a pice of 3/8 to match the other side. When these brackets were fabbed, they were m...

driversside.jpg
1732 hits | 59.33 KB | Posted: 2/25/05
drivers side. The cage arms mounted about 2" further back from where my other arms were, so I cut o...

frontshaftclearance.jpg
1554 hits | 54.59 KB | Posted: 2/25/05
These arms are sweet. Clearance high and in. they do come a little close to the 80's kingpin style...