|
|
Once all the contacts are clean, apply a light film of silicone electrical grease (NOT dielectric, thermal, or chassis; or battery snot, or anti-seize, or conductive grease), then carefully reassemble the switch. It may be necessary to use a piece of paper to ramp the headlight contacts into their slot. Install a screw near the hazard switch first. '92-97 F-series/Broncos use Motorcraft SW5591. Upper Connector Motorcraft WPT-611Lower Connector Motorcraft WPT-179Electrical Grease (F8AZ-19G208-AA)
 |
|
![Once all the contacts are clean, apply a light film of silicone electrical grease (NOT dielectric, thermal, or chassis; or battery snot, or anti-seize, or conductive grease), then carefully reassemble the switch. It may be necessary to use a piece of paper to ramp the headlight contacts into their slot. Install a screw near the hazard switch first. '92-97 F-series/Broncos use [url=https://www.amazon.com/dp/B000C5FUGM]Motorcraft SW5591[/url].
Upper Connector [url=http://www.amazon.com/dp/B0065UPZYU/]Motorcraft WPT-611[/url]
Lower Connector [url=http://www.amazon.com/dp/B000IYHEK2/]Motorcraft WPT-179[/url]
[url=http://www.fcsdchemicalsandlubricants.com/main/product.asp?product=Electrical%20Grease&category=Greases]Electrical Grease (F8AZ-19G208-AA)
[img]http://www.fcsdchemicalsandlubricants.com/main/images/Products/XG12.jpg[/img][/url]](https://www.supermotors.net/getfile/867612/fullsize/13cleaned.jpg)