the bronco came with a hole in the floor, but no where to mount a shift lever.  This piece of metal ...
shifterbracketlocation.jpg
866 hits | 57.79 KB | Posted: 2/27/05

the bronco came with a hole in the floor, but no where to mount a shift lever. This piece of metal ...
this is the bracke removed, and ready for me to take over.
bracketspace.jpg
801 hits | 70.49 KB | Posted: 2/27/05

this is the bracke removed, and ready for me to take over.
Cut from 1/4" plate, this will be the mounting piece to the tranny
bracket1.jpg
779 hits | 52.25 KB | Posted: 2/27/05

Cut from 1/4" plate, this will be the mounting piece to the tranny
The ORD sticks came with an 'ear'shaped mounting bracket, esigned to mount to the bolts on the klune...
bracket2.jpg
840 hits | 63.7 KB | Posted: 2/27/05

The ORD sticks came with an 'ear'shaped mounting bracket, esigned to mount to the bolts on the klune...
the bracket tacked together, awaiting the rest of the install before final weld.
brackettacked.jpg
811 hits | 40.5 KB | Posted: 2/27/05

the bracket tacked together, awaiting the rest of the install before final weld.
bracket and sticks mounted
sticks1.jpg
783 hits | 76.53 KB | Posted: 2/27/05

bracket and sticks mounted
this took lots of "in and out" measuring, marking, remeasuring, etc and took a full day.  But the fi...
sticks2.jpg
836 hits | 71.54 KB | Posted: 2/27/05

this took lots of "in and out" measuring, marking, remeasuring, etc and took a full day. But the fi...
heres where the sticks pop out.  Getting that cover off was HARD.  I dont know what kinda glue Ford ...
sticksin.jpg
942 hits | 56.55 KB | Posted: 2/27/05

heres where the sticks pop out. Getting that cover off was HARD. I dont know what kinda glue Ford ...
bracket welded up with a small gusset plate.  It was recommended that the sticks get some force agai...
weldedbracket1.jpg
839 hits | 74.35 KB | Posted: 3/4/05

bracket welded up with a small gusset plate. It was recommended that the sticks get some force agai...
yeah, i know, my welds suck but it should hold
weldedbracket2.jpg
856 hits | 75.36 KB | Posted: 3/4/05

yeah, i know, my welds suck but it should hold
bracket finished and painted.  ready for install. The grinder gives an idea of how large the bracket...
finishedbracket.jpg
919 hits | 68.81 KB | Posted: 3/4/05

bracket finished and painted. ready for install. The grinder gives an idea of how large the bracket...
went to pick and pull, and got this bracket and padding out of an F250.  im guessing that a bronco w...
stickpadding.jpg
841 hits | 64.9 KB | Posted: 3/15/05

went to pick and pull, and got this bracket and padding out of an F250. im guessing that a bronco w...
The ORD shifters come with the boot, and a metal "doughnut" that mounts the boots to their bracket. ...
twinsclose.jpg
821 hits | 68.55 KB | Posted: 3/15/05

The ORD shifters come with the boot, and a metal "doughnut" that mounts the boots to their bracket. ...
the two "stock" holes wouldnt have allowed a bolt to mount to the  plastic, so i drilled a 3rd one i...
twinscloseback.jpg
842 hits | 68.66 KB | Posted: 3/15/05

the two "stock" holes wouldnt have allowed a bolt to mount to the plastic, so i drilled a 3rd one i...
I mounted the klune shifter and ran the cable through the  tranny cover plate.  The shifter cable do...
kluneclose.jpg
844 hits | 64.05 KB | Posted: 3/15/05

I mounted the klune shifter and ran the cable through the tranny cover plate. The shifter cable do...
here are the sticks and all installed.  Im pretty happy, but may pull the sticks out and have them b...
sidesticks.jpg
865 hits | 52.82 KB | Posted: 3/15/05

here are the sticks and all installed. Im pretty happy, but may pull the sticks out and have them b...
otherside of sticks
othersidesticks.jpg
852 hits | 57.82 KB | Posted: 3/15/05

otherside of sticks
Im pleased, overall it came out well, has plenty of clearance to shift, and once painted looks good ...
bothsticks.jpg
879 hits | 63.65 KB | Posted: 3/15/05

Im pleased, overall it came out well, has plenty of clearance to shift, and once painted looks good ...