benttierods.jpg
2752 hits | 32.72 KB | Posted: 6/29/03
why I went for a sas

tierods.jpg
2478 hits | 20.58 KB | Posted: 6/29/03
yet again

rivetremoved.JPG
2462 hits | 41.34 KB | Posted: 6/29/03
drivers side front most rivet removed. it was interfering with the bucket being mounted. It was wh...

driversbucket.JPG
4609 hits | 82.52 KB | Posted: 6/29/03
drivers side coil bucket installed

billnuts.JPG
2835 hits | 62.73 KB | Posted: 6/29/03
here's bill playing with his nuts

newbracket.jpg
4204 hits | 28.21 KB | Posted: 6/29/03
stock radius arm bracket for 79 ford, laid back approx 20 degrees.

newbracket2.jpg
2578 hits | 29.89 KB | Posted: 6/29/03
I also added some more metal on the side of the frame rail to help spread the load since the newer f...

newbracketon.jpg
2488 hits | 42.95 KB | Posted: 6/29/03
temporarily secured. Note how it is notched out for the body mount so I can push the axle forward t...

newbracketon2.jpg
2249 hits | 39.6 KB | Posted: 6/29/03
It should allow for a much better angle on the radius arm. Without the lay back, it would have put ...

front.jpg
2310 hits | 47.44 KB | Posted: 6/29/03
still need steering and track bar

d-bracket.jpg
2187 hits | 36.31 KB | Posted: 6/29/03
drivers side bracket installed with 5, 1/2" bolts

d-radius.jpg
2117 hits | 31.3 KB | Posted: 6/29/03
radius arm angle at ride height with the laid back bracket. It is pretty a good angle

d-radius2.jpg
2277 hits | 45.97 KB | Posted: 6/29/03
another shot of arm

d-tire.jpg
2078 hits | 23.63 KB | Posted: 6/29/03
drivers side tire clearance from fender

d-tire2.jpg
2092 hits | 41.88 KB | Posted: 6/29/03
bumper clearance on drivers side

driveshaft.jpg
2148 hits | 38.45 KB | Posted: 6/29/03
driveshaft clearance

p-bracket.jpg
2010 hits | 24 KB | Posted: 6/29/03
passenger side bracket with return fuel line

p-radius.jpg
2154 hits | 43.44 KB | Posted: 6/29/03
passenger side arm

p-radius2.jpg
2091 hits | 41.2 KB | Posted: 6/29/03
passenger side again

beefy.jpg
2145 hits | 30.95 KB | Posted: 6/29/03
much mo beefy than the stock crap

trackbars.jpg
2098 hits | 40.56 KB | Posted: 6/29/03
old and new trackbars. the new stuff is much more heavy duty. got it from rockequipment.com

arbconnection.jpg
1963 hits | 35 KB | Posted: 6/29/03
arb connection

arbline.jpg
2009 hits | 42.86 KB | Posted: 6/29/03
arb line tied to breather line. They are held out of the way with a soft spring to allow for whee...

arbreg.jpg
1993 hits | 54.34 KB | Posted: 6/29/03
arb regulator tied into the york system

arbregulator.jpg
1939 hits | 45.6 KB | Posted: 6/29/03
just another shot of the regulator with the diff and tranny breathers tied in behind it.

newbrakes.jpg
2107 hits | 49.02 KB | Posted: 6/29/03
bent all new brake lines since I removed the 4wabs computer. Stock ford is metric, so you need to r...

pumpkinlines.jpg
2430 hits | 44.35 KB | Posted: 6/29/03
all the lines to the pumpkin

lowertrac.jpg
4704 hits | 35.51 KB | Posted: 6/29/03
front of lower track bar mount

lowertrac2.jpg
4314 hits | 25.33 KB | Posted: 6/29/03
rear of lower track bar mount. the holes add at least 15 horse power

uppertrac.jpg
5121 hits | 47.41 KB | Posted: 6/29/03
upper track bar mount. Welded to frame and notched for access to the gearbox bolt

uppertrac3.jpg
2675 hits | 39.02 KB | Posted: 6/29/03
different angle

uppertrac4.jpg
2520 hits | 45.39 KB | Posted: 6/29/03
again

uppertrac5.jpg
2453 hits | 34.59 KB | Posted: 6/29/03
the cross memeber suport bar

uppertrac6.jpg
2173 hits | 37.35 KB | Posted: 6/29/03
again

testflex1.jpg
2391 hits | 36.53 KB | Posted: 6/29/03
the best i could do close to home

testflex2.jpg
2068 hits | 35.19 KB | Posted: 6/29/03

testflex3.jpg
3127 hits | 42.39 KB | Posted: 6/29/03
A big thanks to Jack for fab'ing up the mount. there is no bumpsteer.

radiusfix.jpg
2304 hits | 34.21 KB | Posted: 6/29/03
Gusseted the radius arm bracket after it started cracking on the ramsey trail. this should fix any ...