4ptcageinfo.jpg 498 hits | 14.89 KB | Posted: 1/22/07 Role cage arrived today. main hoop + door bars. The rest we will fabricate. We tried to bend the hoop ourself, But didn't like the way the bends came out. Safety first! So we purchased this kit.
steering arm.JPG 457 hits | 58.92 KB | Posted: 11/10/06 We had to move the steering arm to clear the Exaust Minfolds using Stock parts. We used 2 steering columns, Think we go it. Just need a Firewall mount now.
oil pan front(relieved K).JPG 415 hits | 39.49 KB | Posted: 11/10/06 We had to heat up & pound down the Front K to clear for the front sump of the Oil pan.
Still might need more to remove the drain plug
oil pan clearance (rear).JPG 417 hits | 44.89 KB | Posted: 11/10/06 I had to knock the Rear of the Front K to clear the Rear Sump of the Oil pan. Still need more on the left side
inside & out.JPG 376 hits | 72.05 KB | Posted: 11/2/06 We have already started to gut all interior. To make room for our Frame & role cage.
4ptcageinfo.jpg 498 hits | 14.89 KB | Posted: 1/22/07 Role cage arrived today. main hoop + door bars. The rest we will fabricate. We tried to bend the hoop ourself, But didn't like the way the bends came out. Safety first! So we purchased this kit.
steering arm.JPG 457 hits | 58.92 KB | Posted: 11/10/06 We had to move the steering arm to clear the Exaust Minfolds using Stock parts. We used 2 steering columns, Think we go it. Just need a Firewall mount now.
oil pan clearance (rear).JPG 417 hits | 44.89 KB | Posted: 11/10/06 I had to knock the Rear of the Front K to clear the Rear Sump of the Oil pan. Still need more on the left side
oil pan front(relieved K).JPG 415 hits | 39.49 KB | Posted: 11/10/06 We had to heat up & pound down the Front K to clear for the front sump of the Oil pan.
Still might need more to remove the drain plug
inside & out.JPG 376 hits | 72.05 KB | Posted: 11/2/06 We have already started to gut all interior. To make room for our Frame & role cage.
Removed fuel tank Well I removed the fuel tank last night. Of course she was half full. I pumped out over 5 gallons + she still had fuel in her. I removed the fuel pump from tank. She's out. Now I have room for my Exhaust. My fuel cell will go into the trunk with the floor removed.
0.00
11/08/06
Modification
Oil pan Fit Well we placed in a 351W block & heads with a C4 trany to start fitting Items. First was the Oil Pan. I had to Knoch the rear of the Front K to clear the Canton's Oil rear sump. (Still need more on the left side). We had to Relieve the Front of the K to clear front Oil pan Sump. (Might need more for the oil drain plug).
We also changed to Steering arm To clear the Exaust Manifold using stock parts(We use 2 Steering columns)
0.00
11/02/06
Modification
Changed master cylinder We removed the ABS unit + Master cylinder + brake booster. Installed a different booster & a 4 line master Cylinder. Have not run new brake lines yet.
.JPG)
.JPG){kind=spacer}
