broken manifold.jpg
990 hits | 40.06 KB | Posted: 8/20/03
This is what happens when you crack your exhaust manifold. It came off the head in two pieces.

shim1.jpg
1069 hits | 50.5 KB | Posted: 8/20/03
Passenger side 6 degree shim, broke in half from wheeling, they are made of really crappy metal, I'm...

block1.jpg
982 hits | 78.09 KB | Posted: 8/20/03
This is the rear 4 inch lift block before the ubolts were off, this turned out to be a real pain, th...

block2.jpg
899 hits | 66.12 KB | Posted: 8/20/03
U bolt mount removed and out of the way, the bolt circled in the center is the cetering pin bolt. Th...

stabilizer.jpg
938 hits | 25.49 KB | Posted: 8/20/03
Busted steering stabilizer, courtesy of Stump Trail in Ocala Florida.

Leaking diff.jpg
943 hits | 26.02 KB | Posted: 8/20/03
Leaking pinion seal I believe. Will replace when I regear my Bronco. The leak is not too bad right n...

vacuumline.jpg
881 hits | 19.19 KB | Posted: 9/22/03
Bad vacuum line that caused my A/C to malfunction, was under the hood mixed in with the wiring harne...

leaking main.jpg
863 hits | 100.07 KB | Posted: 9/22/03
Not sure where the oil is coming from here. Once I cleaned it off it seemed to slow down, it is defi...

dustboots1.jpg
963 hits | 83.4 KB | Posted: 11/5/03
These were my old dust boots from my drag link and tie rod ends. They were pretty well trashed and p...

dustboots2.jpg
857 hits | 76.84 KB | Posted: 11/5/03

bentsteering.jpg
899 hits | 86.81 KB | Posted: 11/10/03
Happened at the Hooters course 11/03, this is my second bent stabilizer in 4 months.

bentsteering2.jpg
902 hits | 90.71 KB | Posted: 11/10/03

rippedboot.jpg
924 hits | 72.48 KB | Posted: 11/10/03
Got torn on a log at Hooters 11/3

Dcp01201.jpg
832 hits | 89.38 KB | Posted: 4/20/04

Img_4791.jpg
887 hits | 54.19 KB | Posted: 2/27/05

Img_4792.jpg
855 hits | 58.23 KB | Posted: 2/27/05
This is what happens when your front wheel brearings go. The lock nuts got welded to the spindle. Th...

Img_4798.jpg
897 hits | 55.77 KB | Posted: 2/27/05