sliders 2.jpg 1384 hits | 91.49 KB | Posted: 9/22/03 Heavy duty sliders built by Dave Edwards High Desert Off Road. These will be installed once I get a...
sliders1.jpg 1416 hits | 84.5 KB | Posted: 9/22/03 Sliders will be mounted with 16 1 1/2 inch grade 8 bolts with washers and locking washers.
driverside1.jpg 1445 hits | 92.01 KB | Posted: 9/22/03 This is where the emergency brake cable runs along the drivers side frame rail. The slider will moun...
driversside2.jpg 1102 hits | 87.48 KB | Posted: 9/22/03 Towards the rear of the driver's side.
passenger1.jpg 1207 hits | 85.78 KB | Posted: 9/22/03 Passenger side frame rail towards the front, this side will be much easier to do than the the driver...
Dcp00463.jpg 1268 hits | 55.95 KB | Posted: 10/6/03 Front frender mount that needs to be trimmed all the way down in order to mount the slider flush wit...
Dcp00464.jpg 1164 hits | 65.47 KB | Posted: 10/6/03 Remove bolt that mounts fender, then use a 4 inch grinder to remove the metal where the mount origin...
Dcp00465.jpg 1252 hits | 69.02 KB | Posted: 10/6/03 This is what the fender mount will look like once it has been trimmed down. The grinder made pretty ...
Dcp00466.jpg 1260 hits | 70.77 KB | Posted: 10/6/03 Once the mount was ground off we had to drill a hole further up to mount another bolt. Since you hav...
Dcp00467.jpg 1169 hits | 91.46 KB | Posted: 10/6/03 Passenger side slider mounted and held in place with one bolt. Undo the clips that hold the fuel ret...
Dcp00469.jpg 1288 hits | 96.65 KB | Posted: 10/6/03 Here is the proof. Passenger side slider completely mounted and put to the test. Its holding the ful...
driverside2.jpg 1209 hits | 48.7 KB | Posted: 10/7/03 Once the fender mount has been relocated on the driver's side, you have to unbolt these two nuts tha...
driverside3.jpg 1102 hits | 46.89 KB | Posted: 10/7/03 On the rear of the driver's side there are bolts through the frame for the fuel filter bracket. Remo...
driversidefront.jpg 1161 hits | 107.14 KB | Posted: 10/8/03 driver's side front pad mount. There is a fuel line bracket that runs behind this mount, bolts to th...
driversiderear.jpg 1219 hits | 93.41 KB | Posted: 10/8/03 Rear driver's side pad mounting, there is about a 1/4 inch clearance between the ebrake cable and th...
fuelfilter.jpg 1325 hits | 92.27 KB | Posted: 10/8/03 This is behind the rear pad mount on the driver's side. You must remove the bolts holding the fuel f...
Sliders / Framerails
