20140623_183128.jpg 353 hits | 85.67 KB | Posted: 6/24/14 The old insulation on my evaporator box was falling apart. I had seen people use this Reflectix insu...
20140623_183346.jpg 334 hits | 62.33 KB | Posted: 6/24/14 Here is the box, you can see how filthy it is. You only need to remove the side that covers the evap...
20140623_183357.jpg 333 hits | 55.58 KB | Posted: 6/24/14 there are about 6 screws that hold the cover on. some of them are in tough to reach places so you'll...
20140623_192306.jpg 303 hits | 67.33 KB | Posted: 6/24/14 all of the screws are removed and so is the nut holding box to the firewall. I'm able to start separ...
20140623_192648.jpg 311 hits | 61.4 KB | Posted: 6/24/14 this screw/bolt is the problem..Ford in it's infinite wisdom has is attached to the box from the ins...
20140623_192913.jpg 327 hits | 56.13 KB | Posted: 6/24/14 here is a shot of the screw/bolt from the inside..it's a 10mm.
20140623_193507.jpg 314 hits | 72.43 KB | Posted: 6/24/14 once that was removed it took a bit of manipulation, but the cover finally came out and there is the...
20140623_212203.jpg 336 hits | 74.31 KB | Posted: 6/24/14 finished product. hopefully this should help keep some of the engine heat out of the ducts and help ...
20140624_192323.jpg 326 hits | 57.03 KB | Posted: 6/25/14 you should clean out the cowl drains while you have the inner fender pulled. this one was clean..
20140624_193102.jpg 334 hits | 95.46 KB | Posted: 6/25/14 while I have everything pulled apart, I wanted to check the evaporator they can accumulate a lot of ...
20140624_195310.jpg 322 hits | 95.34 KB | Posted: 6/25/14 flushed from the back with water and blown with compressed air..looks good.
20140624_195329.jpg 330 hits | 65.48 KB | Posted: 6/25/14 seems like this is the factory evap. I've never replaced since I bought the rig and that's almost 20...
20140624_201933.jpg 335 hits | 88.57 KB | Posted: 6/25/14 added a few more pieces of insulation to the box, figured that would help improve the R value and ke...
20140624_203725.jpg 313 hits | 75.39 KB | Posted: 6/25/14 I almost forgot about about the bottom of the box. this was the other half and it was also covered w...
20140624_210255.jpg 332 hits | 73.98 KB | Posted: 6/25/14 bottom view. doubled up on the insulation here. I think that should work pretty well...I may still g...
20140629_122521.jpg 371 hits | 48.42 KB | Posted: 6/30/14 Testing my A/C...it was over 101 yesterday. granted, that was in the sun..not sure what the heat ind...
20140629_122133.jpg 338 hits | 53.97 KB | Posted: 6/30/14 set the system to Max A/C with the windows down and this was the best it would do..
Evaporator Box R&R
