Don't need to pull this just to change the pump, but we're going in for the timing chain gear set, s...
IMG_0062.JPG
2432 hits | 60.82 KB | Posted: 5/21/04

Don't need to pull this just to change the pump, but we're going in for the timing chain gear set, s...
Here's what we're after next.  Get these four 9/16" bolts out and the pulleys come off the harmonic ...
IMG_0063.JPG
2162 hits | 38.87 KB | Posted: 5/21/04

Here's what we're after next. Get these four 9/16" bolts out and the pulleys come off the harmonic ...
Use em' if you got em'. Usually you don't even need to block the crank as the impact will back them ...
IMG_0066.JPG
2365 hits | 70.15 KB | Posted: 5/21/04

Use em' if you got em'. Usually you don't even need to block the crank as the impact will back them ...
Give it up sweetness, with a 24" bar it's already over ! The other Fram you see is the remote trans ...
IMG_0069.JPG
2827 hits | 79.64 KB | Posted: 5/21/04

Give it up sweetness, with a 24" bar it's already over ! The other Fram you see is the remote trans ...
Good old $3 off-shore puller ! Running Mopars for 25+ years, no balancer goes un-marked ! For heaven...
IMG_0073.JPG
2335 hits | 68.8 KB | Posted: 5/21/04

Good old $3 off-shore puller ! Running Mopars for 25+ years, no balancer goes un-marked ! For heaven...
Easier than fishing with dynamite ! Check the balancer shaft snout.  If it doesn't clean up or if th...
IMG_0074.JPG
2804 hits | 72.69 KB | Posted: 5/21/04

Easier than fishing with dynamite ! Check the balancer shaft snout. If it doesn't clean up or if th...
Well that's just outta focus ! What bozo took that ?! Maybe you can make out the timing marks lined ...
IMG_0076.JPG
2870 hits | 57.15 KB | Posted: 5/21/04

Well that's just outta focus ! What bozo took that ?! Maybe you can make out the timing marks lined ...
While you're waiting for me to run out and buy the TC set you can check out the distributor gear's r...
IMG_0081.JPG
2359 hits | 63.38 KB | Posted: 5/21/04

While you're waiting for me to run out and buy the TC set you can check out the distributor gear's r...
Who knew this stuff was dishwasher safe ? Or how to get/stay single.  Guess who's outta town ?
IMG_0082.JPG
2357 hits | 61.5 KB | Posted: 5/21/04

Who knew this stuff was dishwasher safe ? Or how to get/stay single. Guess who's outta town ?
All clean and painted. I glued the cork oil pan corner gaskets on the night before so it'd be one le...
IMG_0131.JPG
2813 hits | 50.04 KB | Posted: 5/24/04

All clean and painted. I glued the cork oil pan corner gaskets on the night before so it'd be one le...
Too much time on your hands ?  Paint up your timing indicator tab so you can see them against the ma...
IMG_0123.JPG
2373 hits | 38.36 KB | Posted: 5/24/04

Too much time on your hands ? Paint up your timing indicator tab so you can see them against the ma...
Torquing the cam bolt often requires jamming in a punch, shown here, to tighten against.
IMG_0137.JPG
2797 hits | 82.87 KB | Posted: 5/24/04

Torquing the cam bolt often requires jamming in a punch, shown here, to tighten against.
Don't forget to chase all the threads with a tap to clean them out. I did the TC case cover before p...
IMG_0140.JPG
2340 hits | 65.04 KB | Posted: 5/24/04

Don't forget to chase all the threads with a tap to clean them out. I did the TC case cover before p...
Slip in the two lowest bolts a few threads then lever the case down with the punch and draw it onto ...
IMG_0145.JPG
2594 hits | 63.67 KB | Posted: 5/24/04

Slip in the two lowest bolts a few threads then lever the case down with the punch and draw it onto ...
Several bolts pass through the water pump first and then the TC cover, so be prepared to bolt on the...
IMG_0150.JPG
3334 hits | 60.52 KB | Posted: 5/24/04

Several bolts pass through the water pump first and then the TC cover, so be prepared to bolt on the...