upper and lower mounts 001.jpg
1223 hits | 63.74 KB | Posted: 11/23/10
Just a start here, long overdue, but finally put some thought into how to add this easily with littl...

upper and lower mounts 003.jpg
1247 hits | 67.88 KB | Posted: 11/23/10
More pics coming. had to order a little steel, so patience and check back. Should get going on thi...

upper and lower mounts 004.jpg
1025 hits | 61.38 KB | Posted: 12/11/10
working on the rough lower mounts. had to wait for some 2x3 .188 wall rectangular tube.

upper and lower mounts 005.jpg
1058 hits | 76.69 KB | Posted: 12/11/10

upper and lower mounts 006.jpg
1134 hits | 35.42 KB | Posted: 12/11/10
lower mounts primed, painted, ready for install.

upper and lower mounts 007.jpg
1409 hits | 65.68 KB | Posted: 12/11/10
bolted in the lower mount, just put a shock up to test fit here.

upper and lower mounts 008.jpg
1080 hits | 54.7 KB | Posted: 12/11/10
more test fit.

upper and lower mounts 009.jpg
1086 hits | 41.04 KB | Posted: 12/11/10

upper and lower mounts 010.jpg
1035 hits | 52.32 KB | Posted: 12/11/10

upper and lower mounts 011.jpg
1100 hits | 56.2 KB | Posted: 12/11/10

upper and lower mounts 012.jpg
1011 hits | 51.02 KB | Posted: 12/11/10
testing turning radius to make sure nothing contacts, specifically the caliper.

upper and lower mounts 013.jpg
933 hits | 58.42 KB | Posted: 12/11/10
all clear, nothing will touch so it's on to the upper mount which are the 2 larger pieces of angle s...

upper and lower mounts 014.jpg
1164 hits | 68.87 KB | Posted: 12/15/10
.188 U welded to a cut down piece of .188 angle, which in turn is welded all around onto the side o...

upper and lower mounts 015.jpg
1064 hits | 69.76 KB | Posted: 12/15/10

upper and lower mounts 016.jpg
1321 hits | 67.6 KB | Posted: 12/15/10

upper and lower mounts 017.jpg
1034 hits | 53.82 KB | Posted: 12/15/10

upper and lower mounts 018.jpg
1455 hits | 65.13 KB | Posted: 12/15/10
so my original shock position in the ford tower leaves about 5 inches up travel, close to 9 down. T...

shock hoop idea.JPG
1890 hits | 63.41 KB | Posted: 5/10/10

111_1185.JPG
1788 hits | 28.3 KB | Posted: 11/5/06
thinking about fabricating superduty type shock mounts but dual shock, for the front, like these.

upper and lower mounts 020.jpg
944 hits | 49.96 KB | Posted: 12/29/10

upper and lower mounts 022.jpg
1077 hits | 46.58 KB | Posted: 12/29/10

upper and lower mounts 023.jpg
873 hits | 49.36 KB | Posted: 12/29/10

upper and lower mounts 025.jpg
882 hits | 45.11 KB | Posted: 12/29/10

upper and lower mounts 026.jpg
942 hits | 47.79 KB | Posted: 12/29/10

upper and lower mounts 028.jpg
1250 hits | 58.15 KB | Posted: 12/29/10

upper and lower mounts 029.jpg
1036 hits | 60.23 KB | Posted: 12/29/10