the top looks like a great place to install the Aux guages. it is wasted space on this bronco.
guage-install2.jpg
524 hits | 87.82 KB | Posted: 10/18/06

the top looks like a great place to install the Aux guages. it is wasted space on this bronco.
you can see all the unused space behind the bezel. all this is is a second harness cover. you can se...
guage-install.jpg
525 hits | 83.29 KB | Posted: 10/18/06

you can see all the unused space behind the bezel. all this is is a second harness cover. you can se...
I just need to trim the blue plastic at the top.
guage-install-3.jpg
491 hits | 85.44 KB | Posted: 10/18/06

I just need to trim the blue plastic at the top.
i wanted these to look factory. so i looked and fount the space on the top of the radio was wasted s...
guage face reinstalled.jpg
470 hits | 112.45 KB | Posted: 10/18/06

i wanted these to look factory. so i looked and fount the space on the top of the radio was wasted s...
these were bought from Harbor Frieght for $6. amp/water temp/oil pressure. not too bad of a set.
new-guage2.jpg
659 hits | 64.34 KB | Posted: 10/18/06

these were bought from Harbor Frieght for $6. amp/water temp/oil pressure. not too bad of a set.
This is the back of the Harbor Frieght guage set. simple connections and easy to follow instructions...
new-guage.jpg
475 hits | 61.7 KB | Posted: 10/18/06

This is the back of the Harbor Frieght guage set. simple connections and easy to follow instructions...
if you knew where you were going and did not install and remove the guages a few times these are goo...
temp probe.jpg
490 hits | 102.26 KB | Posted: 10/18/06

if you knew where you were going and did not install and remove the guages a few times these are goo...
This is the back side of the aftermarket guages. I got this set from Pep Boys $20. The connections a...
pod6.jpg
448 hits | 107.24 KB | Posted: 10/18/06

This is the back side of the aftermarket guages. I got this set from Pep Boys $20. The connections a...
i wanted simple and easy to make and install. this adapter mounts to the factory top speaker mounts....
pod mount.jpg
461 hits | 87.27 KB | Posted: 10/18/06

i wanted simple and easy to make and install. this adapter mounts to the factory top speaker mounts....
I coated it with some paint and it is ready to install.
podmount4.jpg
530 hits | 104.93 KB | Posted: 10/18/06

I coated it with some paint and it is ready to install.
one last angle ---still waiting for the paint to dry.....lol
podmouint3.jpg
473 hits | 91.12 KB | Posted: 10/18/06

one last angle ---still waiting for the paint to dry.....lol
the dash was beat up bad in this bronco. i added a few nuts as spacers and used the factory speaker ...
podmount2.jpg
516 hits | 87.79 KB | Posted: 10/18/06

the dash was beat up bad in this bronco. i added a few nuts as spacers and used the factory speaker ...
here is a lower view. i trimed out the plastic (if you do this watch the main wire harness across th...
podmount.jpg
452 hits | 71.94 KB | Posted: 10/18/06

here is a lower view. i trimed out the plastic (if you do this watch the main wire harness across th...
this was setting up the next step. the guages are just in place not completly installed. i wanted to...
guage1.jpg
552 hits | 104.86 KB | Posted: 10/18/06

this was setting up the next step. the guages are just in place not completly installed. i wanted to...
Here is the stock bezel before i started.
dashcover3.jpg
510 hits | 57.89 KB | Posted: 11/3/06

Here is the stock bezel before i started.
Here is the stock bezel. i am not too worried about chopping it up as you can see the PO did to inst...
dash cover.jpg
521 hits | 71.08 KB | Posted: 11/3/06

Here is the stock bezel. i am not too worried about chopping it up as you can see the PO did to inst...
I going to remove almost all the top box.
dash cover2.jpg
482 hits | 78.59 KB | Posted: 11/3/06

I going to remove almost all the top box.
All i had to do the the bezel was trim out the top portion. this one was damaged anyway.
dashbezel.jpg
497 hits | 64.77 KB | Posted: 10/18/06

All i had to do the the bezel was trim out the top portion. this one was damaged anyway.
I had to trim the radio bezle (i  going to get a new one and redo i think still not sure. this works...
pod2.jpg
504 hits | 93.92 KB | Posted: 10/18/06

I had to trim the radio bezle (i going to get a new one and redo i think still not sure. this works...
this is lookin up from the floor. i mad a sheet metal cover for the guages. you would normally see t...
pod3.jpg
531 hits | 76.59 KB | Posted: 10/18/06

this is lookin up from the floor. i mad a sheet metal cover for the guages. you would normally see t...
Here is another view of the install
pod4.jpg
500 hits | 72.57 KB | Posted: 10/18/06

Here is another view of the install
this looks good and is easy to read.
guage2.jpg
554 hits | 81.77 KB | Posted: 10/18/06

this looks good and is easy to read.
this is the view from the driver seat.
pod5.jpg
485 hits | 104.76 KB | Posted: 10/18/06

this is the view from the driver seat.
here are the SunPros install and from the drivers seat.
guage4.jpg
483 hits | 75.87 KB | Posted: 10/18/06

here are the SunPros install and from the drivers seat.
this is the SunPros from the pas side floor.
guage6.jpg
512 hits | 62.01 KB | Posted: 10/18/06

this is the SunPros from the pas side floor.
To hide or trim out the guages i took a piecs of sheet metal and bent and cut it to fit the pod. i r...
guages3.jpg
486 hits | 42.33 KB | Posted: 11/3/06

To hide or trim out the guages i took a piecs of sheet metal and bent and cut it to fit the pod. i r...
Here is the trim on the guagesas seen from the back.
guages2.jpg
500 hits | 50.53 KB | Posted: 11/3/06

Here is the trim on the guagesas seen from the back.
Here is another view of the trim panel.
guages.jpg
500 hits | 57.93 KB | Posted: 11/3/06

Here is another view of the trim panel.
to install the water temp probe i just removed the stock sending unit and added a couple nipples and...
Water temp sending Unit.jpg
461 hits | 92.16 KB | Posted: 10/18/06

to install the water temp probe i just removed the stock sending unit and added a couple nipples and...
Here are the SunPros install and working. Volts at 14 (Thanks 3G swap) oil Pressure 27 at idle and w...
working.jpg
535 hits | 73.26 KB | Posted: 10/18/06

Here are the SunPros install and working. Volts at 14 (Thanks 3G swap) oil Pressure 27 at idle and w...
Here are the SunPro guages working and looking good.
guage2.jpg
647 hits | 81.77 KB | Posted: 11/3/06

Here are the SunPro guages working and looking good.