DSC00085.JPG
546 hits | 35.55 KB | Posted: 1/16/07
after reading how easy this was i decided i had to do it just for the "Bling" factor. These are out ...

DSC00086.JPG
478 hits | 34.58 KB | Posted: 1/16/07
here is a different view.

lowfuel7.JPG
511 hits | 51.76 KB | Posted: 2/27/07
This i the back side of the 1992 bronco dash. the 3 clips in the middle is where the fuel guage make...

lowfuel6.JPG
513 hits | 36.89 KB | Posted: 2/27/07
here is a closer picture of the back of the 1992 panel.

lowfuel4.JPG
493 hits | 47.35 KB | Posted: 2/27/07
here is the back of the guage. there are 3 pins. 1 12v hot, 1 ground and the signal wire to the fuel...

lowfuel5.JPG
483 hits | 45.99 KB | Posted: 2/27/07
this is a closer shot of the guages 3 pins. i used the motorcycle battery as the 12 volt source.

lowfuel2.JPG
526 hits | 76.2 KB | Posted: 2/27/07
with the batter connected if i move the float the guage moves.

lowfuel3.JPG
490 hits | 72.33 KB | Posted: 2/27/07
if i moved the float the other way it moves the other way.

low fuel1.JPG
498 hits | 69.73 KB | Posted: 2/27/07
i had to play with it for a few. i move the float to a different spot.

lowfuel.JPG
516 hits | 67.6 KB | Posted: 2/27/07
ok here is the last play picture.. i decided i want to fit this in the stock dash in my 1983 so i wa...

newguage.JPG
482 hits | 53.29 KB | Posted: 3/1/07
here is the gas guage from a truck with a tac. it is smaller than the truck without one.

newguage2.JPG
432 hits | 52.74 KB | Posted: 3/1/07
here is the back side of the guages GAS/Temp

broncogauge.JPG
521 hits | 61.72 KB | Posted: 3/16/07
since i did not want to destroy my only working speedometer i picked up another one. this time i got...

broncogauge2.JPG
497 hits | 57.87 KB | Posted: 3/16/07
Here is the back side. it looks just like any other 83-86 gauge cluster.