|
|
'87-91 Low Fuel Light IF THE IMAGE IS TOO SMALL, click it. This is one way to add the anti-slosh module & an LED to a cluster without the module slot. I removed the EUL/IMS module and found its screws perfectly spaced to hold this one. I soldered a few wires onto the film circuit, drilled a hole for the LED, and connected it just like on the later cluster. The bosses on the white cluster housing hold the module barely above the gauge terminals, but I also added a layer of tape on the back of the module to prevent short circuits between it & the film circuit.  |
|
!['87-91 Low Fuel Light
IF THE IMAGE IS TOO SMALL, click it.
This is one way to add the anti-slosh module & an LED to a cluster without the module slot. I removed the EUL/IMS module and found its screws perfectly spaced to hold this one. I soldered a few wires onto the film circuit, drilled a hole for the LED, and connected it just like on the later cluster. The bosses on the white cluster housing hold the module barely above the gauge terminals, but I also added a layer of tape on the back of the module to prevent short circuits between it & the film circuit.
[url=http://www.supermotors.net/vehicles/registry/media/846881][img]http://www.supermotors.net/getfile/846881/thumbnail/lowfuel88ke.jpg[/img][/url]](https://www.supermotors.net/getfile/832455/fullsize/lowfuellt88.jpg)