torkum
 |
|
• mt. juliet, TN, USA |
|
• Registered on 12/22/2007 |
|
• 75 posts |
|
|
|
 Posted:9/1/2008 16:11 |
|
|
SECTION 100-01: Identification Codes 2004 F-150 Heritage Workshop Manual
DESCRIPTION AND OPERATION Procedure revision date: 06/27/2003
--------------------------------------------------------------------------------
Identification Codes Printable View (491 KB)
Vehicle Identification Number (VIN) Locator
The vehicle identification number (VIN) is a 17-digit combination of letters and numbers. The VIN is stamped on a metal tab riveted to the instrument panel, top upper left of the dash. The VIN number is also found on the vehicle certification (VC) label.
Item Description
1 World manufacturer identifier (WMI)
2 Brake type and gross vehicle weight rating (GVWR), may also include the vehicle restraint type code
3 Vehicle line, series, body type code
4 Engine type code
5 Computer-generated check digit
6 Model year code
7 Assembly plant code
8 Production sequence number
Vehicle Identification Number
World Manufacturer Identifier
The first three vehicle identification number (VIN) positions are the world manufacturer identifier.
2FT — Ford Motor Company, Canada, truck, completed vehicle
2FD — Ford Motor Company, Canada, truck, incomplete vehicle
3FT — Ford Motor Company, Mexico, truck, completed vehicle
Brake and Gross Vehicle Weight Code
The fourth VIN position is the vehicle brake type and GVWR code (all vehicles use hydraulic brakes).
Z — 5,001-6,000 pounds GVWR with driver and front passenger air bags
R — 6,001-7,000 pounds GVWR with driver and front passenger air bags
P — 7,001-8,000 pounds GVWR with driver and front passenger air bags
Line, Series and Body Type
Positions 5 through 7 indicate vehicle line, series and body type.
F07 — Regular Cab, 4x2, Flareside
F08 — Regular Cab, 4x4, Flareside
F17 — Regular Cab, 4x2, Styleside
F18 — Regular Cab, 4x4, Styleside
X17 — SuperCab, 4x2, Styleside
X18 — SuperCab, 4x4, Styleside
Engine Code
The eighth VIN position is the engine displacement and number of cylinders.
2 — 4.2L, OHV, EFI, V6, Gas
3 — 5.4L, SOHC, SFI, V8, Gas
M — 5.4L, SOHC, EFI, V8, Compressed Natural Gas
W — 4.6L, SOHC, EFI, V8, Gas
Z — 5.4L, Bi-Fuel, V8, Compressed Natural Gas/Propane
Check Digit
The ninth VIN position is a government assigned, computer-generated check digit.
Model Year
The tenth VIN position is the model year code.
4 — 2004
Assembly Plant Code
The eleventh VIN position is the assembly plant code.
C — Ontario Truck (Oakville, Ontario)
M — Cuautitlan (Cuautitlan, Mexico)
Vehicle Serial Number
The last six VIN positions are an alphanumeric code for the vehicle build sequence. This is also the vehicle serial and warranty number.
Vehicle Certification (VC) Label
Vehicle Certification (VC) Label Locator
The vehicle certification (VC) label contains the manufacturer name, the month and year of manufacture, the certification statement, and the VIN. It also includes gross vehicle weight ratings (GVWR).
Item Description
1 Exterior paint code
2 Region code
3 Domestic special order (DSO) code
4 Wheelbase code
5 Brake type code
6 Interior trim code
7 Tape/paint stripe code
8 Radio code
9 Axle code
10 Transmission code
11 Spring code
12 Powertrain calibration information
Vehicle Certification (VC) Label — Canada (Typical)
Vehicle Certification (VC) Label — Mexico (Typical)
Exterior Paint
Paint Codes
Exterior paint color codes may be listed as a two-part code. The first set of paint code characters indicate the primary body color. The second set of paint code characters (if applicable), indicate a two-tone body color or accent body color. All colors are base coat/clear coat.
Primary Body Color
AQ — Arizona Beige
CX — Dark Shadow Gray
E4 — Vermilion
FL — Toreador Red
FX — Merlot
L2 — True Blue Pearl
PX — Dark Highland Green
SN — Sonic Blue
ST — Estate Green
UA — Ebony
YN — Silver Metallic
YZ — Oxford White
Two-Tone or Accent Color
AQ — Arizona Beige
YN — Silver Metallic
Wheelbase
120 — 120-inch (3,048 mm) wheelbase
139 — 139-inch (3,531 mm) wheelbase
157 — 157-inch (3,989 mm) wheelbase
Brake Type
B — Four-wheel disc, four-wheel anti-lock brake system (ABS)
Interior Trim
Interior trim codes are listed as a two-part code. The first character identifies the interior trim type. The second character identifies the interior trim color.
Interior Trim Type
A — Vinyl bench, regular cab
B — Cloth full bench (Mexico build)
C — Cloth full bench seat
F — Cloth captains chairs
L — Leather 40/60 split bench (Lightning)
M — Cloth 40/60 split bench
M — Cloth 40/60 split bench (Mexico build)
S — Cloth 40/60 split bench (Sport)
Interior Color Code
2 — Medium Graphite
H — Medium Parchment
T — Dark Graphite
Tape/Paint Stripe
Upper Tape Stripe
X — No stripe
C — Light Argent/Medium Platinum
D — Medium Platinum/Light Argent
E — Arizona Beige/Deep Sandlewood Metallic
F — Deep Sandlewood Metallic/Arizona Beige
Two-Tone Lower Tape Stripe
A — Light Argent/Medium Platinum
B — Arizona Beige/Deep Sandlewood Metallic
D — Ebony/Satin Silver (Harley)
G — Arizona Beige/Dark Taupe
H — Ebony/Arizona Beige
R — Dark Shadow Gray/Bright Red
Radio Type
5 — AM/FM stereo with compact disc (CD) player
6 — Premium AM/FM stereo with cassette and compact disc (CD) player
9 — Electronic AM/FM stereo with cassette and clock
P — AM/FM stereo with dual media (compact disc (CD) and MP3 capability)
S — Premium AM/FM stereo with six-disc compact disc (CD) changer, clock and unique equalization (Lightning)
X — CDX6 AM/FM stereo with six-disc compact disc (CD) changer
Y — Less radio
Axle Type
18 — 3.08, non-limited slip
19 — 3.55, non-limited slip
24 — 3.54, limited slip
26 — 3.73, non-limited slip
27 — 3.31, non-limited slip
B5 — 4.10, limited slip
B6 — 3.73, limited slip
H9 — 3.55, limited slip
Transmission Type
7 — Four-speed automatic (4R100), heavy duty
E — Four-speed automatic, E4OD (4R100)
M — Five-speed manual overdrive (Mazda M5R2-C)
U — Four-speed automatic, AODE (W/4R70W)
Spring Codes
Spring codes are listed as a two-part code. The first characters listed identify the front springs. The second character listed identifies the rear springs.
Front Springs
B — F75A-5310-BA, coil
K — F75A-5310-RA, coil
L — F75A-5310-SA, coil
M — F75A-5310-TA, coil
N — F75A-5310-XA, coil
P — F75A-5310-YA, coil
R — F75A-5310-ZA, coil
S — F75A-5310-AAA, coil
W — XL3V-5310-AA, coil
Rear Springs
3 — 2L34-5560-EA, leaf
9 — YL34-5560-AF, leaf
A — 2L34-5560-KA, leaf
B — XL34-5560-UB, leaf
D — YL34-5560-CA, leaf
F — XL34-5560-VB, leaf
G — 2L34-5560-MA, leaf
H — XL34-5560-FA, leaf
J — XL34-5560-GA, leaf
K — XL34-5560-YB, leaf
L — 2L34-5560-DA, leaf
M — YL34-5560-BF, leaf
N — YL34-5560-LA, leaf
S — XL3V-5560-CA, leaf
V — XL34-5560-RA, leaf
Powertrain Calibration Information
NOTE: Powertrain calibration information is limited to a maximum of five characters per line on the vehicle certification label. Because of this, calibration identification consisting of more than five characters will wrap to the second line on the VC label.
Powertrain calibration information is printed in the lower right corner of the vehicle certification label. Only the base calibration information is printed. Revision levels will not appear, however, they can be found in On Line Automotive Service Information System (OASIS). For the current model year, Ford Motor Company is using three different protocols which describe powertrain base calibration. These protocols are designed to provide worldwide standardization for vehicle calibration. If the electronic calibration strategy was introduced in 1998 and carried into the current model year, Protocol 1 will be used. Refer to Protocol 1 below. If the electronic calibration strategy was introduced in 1999 and is carried into the current model year, Protocol 2 will be used. Refer to Protocol 2 below. For new electronic calibration strategies introduced in 2000 or beyond use Protocol 3. Refer to Protocol 3 below.
Protocol 1
Item Description
1 Model year (model year in which calibration strategy was first introduced)
2 Engine code
3 Engine revision level
Protocol 2
Item Description
1 Model year (model year in which calibration strategy was first introduced)
2 Engine code
3 Transmission code
4 Emission standard (designates the specific country emission standard)
5 Design level (design level assigned to the engine)
Protocol 3
Item Description
1 Model year (model year in which calibration strategy was first introduced)
2 Vehicle code
3 Transmission code
4 Unique calibration (designates different hardware to similar vehicles). Example: tires, drive ratios, etc.
5 Fleet code (describes fleet to which the vehicle belongs). Example: 6 – evaporative emissions
6 Certification region (lead region where multiple regions are included in one calibration). Example: A – U.S. federal
7 Revision level (will advance as revisions occur). Not printed on label
Protocol 3
The following offers a more detailed explanation of the coding strategy used in Protocol 3.
Model Year
0 — 2000
1 — 2001
2 — 2002
3 — 2003
4 — 2004
Vehicle Line
F5 — F-150
Transmission
1 — Automatic transmission
2 — Manual transmission
Unique Calibration
The Emissions/CAFE/CO2 Compliance Department is responsible for assigning these calibration numbers. Unique calibration identification identifications are assigned to cover similar vehicles to differentiate tires, drive configurations, final drive ratios and other calibration-significant factors.
These two characters are chosen by the analyst to provide identifiable information unique to each calibration. For example, using the number 2 to denote a two-valve engine versus using the number 4 to denote a four-valve engine, offers an easily identifiable difference.
Fleet Code
1 — HDGE/Dyno
2 — Fast AMA, U.S.
3 — ADP, U.S.
4 — Not assigned
5 — Not assigned
6 — Evaporative emissions
7 — MACAA
8 — On-board diagnostics (OBD)
9 — Not assigned
Certification Region
Where multiple regions are included in one calibration, only the lead region will be listed.
5 — U.S. fifty states
A — U.S. federal, including altitude, may include Canada and/or Mexico
B — U.S. California standard, includes U.S. green states
C — Canada
D — China
E — European Community (Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, Netherlands, Portugal, Spain, Sweden and United Kingdom)
F — Extended European Community (E plus Croatia, Czech Republic, Estonia, Hungary, Norway, Poland, Romania, Russian Federation, Slovakia, Slovenia, Switzerland and Yugoslavia)
G — Gulf Cooperative Council (Bahrain, Kuwait, Oman, Qatar, Saudi Arabia and UAE)
H — Hong Kong
J — Japan
K — Korea
L — Malaysia
M — Mexico
N — New Zealand
P — Australia
Q — South America (Brazil)
S — Singapore
T — Taiwan
U — South America (unleaded fuel regions)
V — Vietnam
Y — Military
Z — Israel
Revision Level (not printed on label)
91-99 — Hardware calibration levels
01-04 — Preliminary levels
00 — Job 1 production (initial calibration)
05-09 — Pre-job 1 revisions to calibrations
10-89 — Post-job 1 revisions to calibrations
0B — Durability test level
BD — On-board diagnostics (OBD) intermediate level (pre-05)
--------------------------------------------------------------------------------
|
|
