|
|
10-31-08: I used the templates I made yesterday to mark out the cut lines. I started using the shear. It cut great except You can only cut about 7" deep with this shear! I knew I should have spent the extra money for the throatless shear. :slap Oh well this will work great when I start doing the body work. I'll need to cut out a bunch of small patch panels. Since the shear wasn't going to work for cutting out my floor pieces I dug out the my hand held jigsaw.
Once I had the panels cut out I clamped the panels between a couple 2"x2" tubes. I clamped the whole thing to the tailgate of my 87 F250. Then I hammered the ends to get a bend in them. Next I checked the panels to make sure they fit. I clamped the driverside panel to the floor with a vicegrip.
|
