Modified front1.jpg
478 hits | 57.74 KB | Posted: 6/23/05
Here is a picture from the rear of the stock Xmember, see how much material is cut out?

Modified front2.jpg
426 hits | 72.56 KB | Posted: 6/23/05
A front shot, again WOW it is cut!

Modified front3.jpg
447 hits | 67.46 KB | Posted: 6/23/05
A bad shot, but here is the brace added in. It is NOT mounted to the lower Radius arm mount, so I c...

Modified front4.jpg
437 hits | 63.72 KB | Posted: 6/23/05
A better shot of the brace...

New crossmember1.jpg
641 hits | 67.32 KB | Posted: 6/23/05
Here is a nice rear shot of the second Xmember holding up the weight of the tcases.

New crossmember2.jpg
474 hits | 44.7 KB | Posted: 6/23/05
A close up of how it is mounted to the adapter. Notice how there are studs not bolts, there won't b...

New Crossmember3.jpg
468 hits | 49.07 KB | Posted: 6/23/05
Again, bolted not welded to the frame for ease of removal, installation.

New Crossmember4.jpg
489 hits | 58.45 KB | Posted: 6/23/05
An undershot, see how much space is between the two Xmembers, imagine if I didn't have the second on...

New Crossmember5.jpg
421 hits | 49.73 KB | Posted: 6/23/05
Second shot from down under, shows the whole span.