David Couch > 1996 Ford Bronco > open folder Anti Wrap Bar, winter 05

I used two peices of 1/4" plate steel about 6" x 8" and made template to "fit" what I had. When I d...
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Too bad there were no pictures taken when I set my sock and foot on fire while welding the bracket o...
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
The top and bottom bars are 1.5" x .25" DOM tubing. The top bar is about 36" long, the bottom bar i...
Url
Tag
Img
Thumb
Installed picture before painting.
Url
Tag
Img
Thumb
Picture of shackle mount while I was painting it. It is 37" long, 2"x 3" 11 gauge rectangle tube. ...
Url
Tag
Img
Thumb
Closeup detail of where the square tubing for the actuall shackle mounts. It was 7" from the left e...
Url
Tag
Img
Thumb
View of shackle mount installed, looking forward.
Url
Tag
Img
Thumb
Side view of shackle mount. The front hole in the mount is where the shackle will bolt in. The top...
Url
Tag
Img
Thumb
Closeup of shackle, it was made out of two 5/8" weld in bungs, one left hand thread one right hand t...
Url
Tag
Img
Thumb
Just another view of the shackle assembly, note the 1/4" spacers to allow more right/left movement w...
Url
Tag
Img
Thumb
Cruddy picture of the axle plates welded onto the Sterling. Look at those welds, can you say buble...
Url
Tag
Img
Thumb
Second picture of axle plates installed on Sterling. Not much better of a picture.
Url
Tag
Img
Thumb
View of setup from rear of axle.
Url
Tag
Img
Thumb
Heim (SRE) and bung shackle picture 1/4.
Url
Tag
Img
Thumb
SRE shackle 2/4.
Url
Tag
Img
Thumb
SRE and bung picture 3/4.
Url
Tag
Img
Thumb
SRE and bung shackle 4/4.
Url
Tag
Img
Thumb
Detail of square tube on end of main (upper) tube.
Url
Tag
Img
Thumb
Good view of bar and shackle assembly 1/2.
Url
Tag
Img
Thumb
Good view of square tube and shackle assembly 2/2.
Url
Tag
Img
Thumb
This is the template for the steel that welds onto the rear axle. The two peices are 1/4" steel tha...
Url
Tag
Img
Thumb
  
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog