TIM OLIVA > 1985 Ford Bronco > open folder DIY beadlocks

inner ring
Url
Tag
Img
Thumb
outer ring
Url
Tag
Img
Thumb
protecting the wheel
Url
Tag
Img
Thumb
grinded down the chrome on the rim
Url
Tag
Img
Thumb
first pass with welder, will wirewheel off and run a second pass.
Url
Tag
Img
Thumb
second pass with the welder.
Url
Tag
Img
Thumb
painted the ring to match the rim.
Url
Tag
Img
Thumb
also had my painter shoot the outer rings red.
Url
Tag
Img
Thumb
second wheel all welded and ground down
Url
Tag
Img
Thumb
second coat of primer
Url
Tag
Img
Thumb
and these are the tires going on them 35 inch dunlop mud rovers...
Url
Tag
Img
Thumb
got the hardware.
Url
Tag
Img
Thumb
anti coning ring,,,appears to be made of rubber and cut to fit....
Url
Tag
Img
Thumb
first attempt at valve stems...90 degree but to small for the hole in the rim.
Url
Tag
Img
Thumb
second attempt...right size diameter but not enough of a bend.
Url
Tag
Img
Thumb
and of course the balancing material. plastic pellets. going to go with about 10 ounces.
Url
Tag
Img
Thumb
third try is the charm....valve stems that work
Url
Tag
Img
Thumb
valve stem clearance
Url
Tag
Img
Thumb
inserted rim threw back of tire.
Url
Tag
Img
Thumb
10 oz's plastic pellets
Url
Tag
Img
Thumb
anti-coning ring.
Url
Tag
Img
Thumb
outer ring installed with bolts....
Url
Tag
Img
Thumb
second shot of rim with bolts.
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
   
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog