4.88's, spool, hubs
Hits: 464
Size: 46.17 KB
Posted: 5/5/08
4.88's, spool, hubs
D44 front, caps marked.
Hits: 486
Size: 55.02 KB
Posted: 5/5/08
D44 front, caps marked.
Making a spindle nut socket.
Hits: 498
Size: 56.22 KB
Posted: 5/5/08
Making a spindle nut socket.
Weldin up the socket.
Hits: 470
Size: 45.89 KB
Posted: 5/5/08
Weldin up the socket.
Front end parts.
Hits: 450
Size: 59.32 KB
Posted: 5/5/08
Front end parts.
Bear housings.
Hits: 478
Size: 69.8 KB
Posted: 5/5/08
Bear housings.
Torque the ring on the carrier.
Hits: 445
Size: 53.43 KB
Posted: 5/5/08
Torque the ring on the carrier.
Pinion set up with old nut.
Hits: 452
Size: 52.36 KB
Posted: 5/5/08
Pinion set up with old nut.

Hits: 472
Size: 41.96 KB
Posted: 5/5/08
Checking backlash.
Hits: 474
Size: 38.14 KB
Posted: 5/5/08
Checking backlash.
Checking tooth contact pattern.
Hits: 498
Size: 58.97 KB
Posted: 5/5/08
Checking tooth contact pattern.
Installed seal and new nut.
Hits: 501
Size: 46.15 KB
Posted: 5/5/08
Installed seal and new nut.
Front end buttoned up.
Hits: 478
Size: 52.94 KB
Posted: 5/5/08
Front end buttoned up.
New Warn hubs.
Hits: 499
Size: 41.59 KB
Posted: 5/5/08
New Warn hubs.
Removing rear axles. Four retainer nut.
Hits: 462
Size: 59.23 KB
Posted: 5/5/08
Removing rear axles. Four retainer nut.
A little light Persuasion to pull axle.
Hits: 543
Size: 59.13 KB
Posted: 5/5/08
A little light Persuasion to pull axle.
Drilled a 1/2" hole about half way thru collar.
Hits: 461
Size: 50.27 KB
Posted: 5/5/08
Drilled a 1/2" hole about half way thru collar.
a couple blows with a chisel and the collar split.
Hits: 472
Size: 60.5 KB
Posted: 5/5/08
a couple blows with a chisel and the collar split.
Rear 9" carrier.
Hits: 485
Size: 55.78 KB
Posted: 5/5/08
Rear 9" carrier.
Marked the caps.
Hits: 495
Size: 65.4 KB
Posted: 5/5/08
Marked the caps.
Crush collar. torqued to 185ft lbs to achieve the correct preload on the pinon bearings.
Hits: 515
Size: 51.81 KB
Posted: 5/5/08
Crush collar. torqued to 185ft lbs to achieve the correct preload on the pinon bearings.
Set preload on the carrier bearings.
Hits: 469
Size: 52.02 KB
Posted: 5/5/08
Set preload on the carrier bearings.
Checking backlash. Little too much here.
Hits: 436
Size: 41.18 KB
Posted: 5/5/08
Checking backlash. Little too much here.
Checking backlash again. It varied between .003 and .005 around the ring.
Hits: 482
Size: 40.2 KB
Posted: 5/5/08
Checking backlash again. It varied between .003 and .005 around the ring.
Installed rear carrier.
Hits: 507
Size: 47.59 KB
Posted: 5/5/08
Installed rear carrier.
Done.
Hits: 488
Size: 42.3 KB
Posted: 5/5/08
Done.
Insalled axles with the new bearings pressed on.
Hits: 493
Size: 59.1 KB
Posted: 5/5/08
Insalled axles with the new bearings pressed on.
Breaks and drum back on.
Hits: 488
Size: 50.73 KB
Posted: 5/5/08
Breaks and drum back on.
38.5/14.5-15 TSL/SX's ready to go back on.
Hits: 496
Size: 54.04 KB
Posted: 5/5/08
38.5/14.5-15 TSL/SX's ready to go back on.
Ready for a test drive.
Hits: 475
Size: 56.83 KB
Posted: 5/5/08
Ready for a test drive.
Gave her a bath.
Hits: 475
Size: 64.73 KB
Posted: 5/5/08
Gave her a bath.

Hits: 482
Size: 69.73 KB
Posted: 5/5/08
The truck got a bath too. Had to take advantage of the nice weather for a change.
Hits: 509
Size: 75.39 KB
Posted: 5/5/08
The truck got a bath too. Had to take advantage of the nice weather for a change.
  

About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog