|
|
Hits: 587
Size: 79.02 KB
Posted: 11/11/03
Gettin organized | 
Hits: 605
Size: 109.42 KB
Posted: 11/11/03
Stock gears and a Trac-Lok | 
Hits: 608
Size: 106.85 KB
Posted: 11/11/03
Carrier out | 
Hits: 622
Size: 84.29 KB
Posted: 11/11/03
Here's the stock setup on the bench | 
Hits: 617
Size: 90.63 KB
Posted: 11/11/03
New open carrier and new pinion gear |
Hits: 639
Size: 105.14 KB
Posted: 11/11/03
Empty case | 
Hits: 706
Size: 90.72 KB
Posted: 11/11/03
Don workin the press | 
Hits: 648
Size: 106.77 KB
Posted: 11/11/03
New 4.56 ring gear goin on. Didn't forget the LocTite | 
Hits: 625
Size: 77.47 KB
Posted: 11/11/03
Creative torque method | 
Hits: 677
Size: 108.1 KB
Posted: 11/11/03
Here's the exciter ring for the ABS |
Hits: 631
Size: 84.44 KB
Posted: 11/11/03
Exciter ring cleaned up and installed on the new ring gear | 
Hits: 593
Size: 106.36 KB
Posted: 11/11/03
| 
Hits: 606
Size: 80.95 KB
Posted: 11/11/03
New pinion gear | 
Hits: 665
Size: 85.64 KB
Posted: 11/11/03
Pressing on the new carrier bearings | 
Hits: 632
Size: 83.73 KB
Posted: 11/11/03
Special carrier bearing presser |
Hits: 628
Size: 81.68 KB
Posted: 11/11/03
Carrier back in the truck | 
Hits: 663
Size: 103.67 KB
Posted: 11/11/03
Painting some teeth to check pinion depth | 
Hits: 620
Size: 97.31 KB
Posted: 11/11/03
I sure hope I know what I am doin | 
Hits: 712
Size: 77.41 KB
Posted: 11/11/03
Made an adjustment to the shim pack | 
Hits: 636
Size: 37.4 KB
Posted: 11/11/03
Don making sure the bearing is pressed on all the way |
Hits: 592
Size: 97.1 KB
Posted: 11/11/03
It takes some serious torque on the pinion nut | 
Hits: 638
Size: 87.51 KB
Posted: 11/11/03
Final pattern on the drive side | 
Hits: 672
Size: 85.28 KB
Posted: 11/11/03
Final pattern on the coast side | 
Hits: 679
Size: 51.5 KB
Posted: 11/11/03
Final backlash | 
Hits: 731
Size: 110.04 KB
Posted: 11/11/03
All done with the new LockRight locker installed |
Rear Gear/Locker Install