Meixter > 1991 Ford Bronco > open folder Ford 8.8 Axle Mods

Welding the tubes to the diff housing helps prevent them from spinning and bending
Hits: 767
Size: 82.08 KB
Posted: 2/11/05
Welding the tubes to the diff housing helps prevent them from spinning and bending 		Another shot of tube welded
Hits: 703
Size: 85.72 KB
Posted: 2/11/05
Another shot of tube welded		Here is the beginning of my axle truss
Hits: 688
Size: 88.43 KB
Posted: 2/11/05
Here is the beginning of my axle truss 		Truss tack welded in place
Hits: 728
Size: 91.2 KB
Posted: 2/11/05
Truss tack welded in place		Final check before welding
Hits: 816
Size: 96.95 KB
Posted: 2/11/05
Final check before welding
Here it is welded up
Hits: 759
Size: 87.34 KB
Posted: 2/11/05
Here it is welded up		This is my mock up for a 3/16" thick diff cover
Hits: 763
Size: 81.91 KB
Posted: 2/11/05
This is my mock up for a 3/16" thick diff cover
Hits: 782
Size: 88.91 KB
Posted: 2/11/05

Hits: 761
Size: 89.06 KB
Posted: 2/11/05
Hardened crosspin
Hits: 782
Size: 77.56 KB
Posted: 3/8/05
Hardened crosspin
Kind of an illusion, stock pin on top, hardened one on the bottom. They are the same size.
Hits: 712
Size: 77.71 KB
Posted: 3/8/05
Kind of an illusion, stock pin on top, hardened one on the bottom. They are the same size.		This will be the base of my 1/4" 8.8 diff cover
Hits: 689
Size: 76.66 KB
Posted: 3/8/05
This will be the base of my 1/4" 8.8 diff cover
Hits: 685
Size: 92.7 KB
Posted: 3/8/05
Getting the bolt holes in the right place
Hits: 803
Size: 84 KB
Posted: 3/8/05
Getting the bolt holes in the right place		I will build off of this ring now to match the mock up.
Hits: 815
Size: 88.03 KB
Posted: 3/8/05
I will build off of this ring now to match the mock up.

Hits: 1175
Size: 60.65 KB
Posted: 7/11/09
    
About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog