Hits: 1276
Size: 85.17 KB
Posted: 4/20/05
The frame after removing the TTB upper spring bucket and shocks
Hits: 1219
Size: 91.54 KB
Posted: 4/20/05
The frame after removing the TTB upper spring bucket and shocks
Marking the hole to mount a 78/79 lower spring perch
Hits: 1191
Size: 78.61 KB
Posted: 4/20/05
Marking the hole to mount a 78/79 lower spring perch
A little drill press action
Hits: 1154
Size: 81.11 KB
Posted: 4/20/05
A little drill press action
This is the TTB lower spring mount after some cutting and grinding.  This was used to support the 78...
Hits: 1160
Size: 89.76 KB
Posted: 4/20/05
This is the TTB lower spring mount after some cutting and grinding. This was used to support the 78...
Frame cleaned up
Hits: 1054
Size: 98.94 KB
Posted: 4/20/05
Frame cleaned up
Anti-rust
Hits: 1012
Size: 93.47 KB
Posted: 4/20/05
Anti-rust
The engine cross member was in the way on the drivers side so I put 3 bolts where I could and button...
Hits: 1097
Size: 81.94 KB
Posted: 4/20/05
The engine cross member was in the way on the drivers side so I put 3 bolts where I could and button...

Hits: 1107
Size: 87.69 KB
Posted: 4/20/05
I used an F250 shock hanger for a new shock mount
Hits: 1171
Size: 85.69 KB
Posted: 4/20/05
I used an F250 shock hanger for a new shock mount
New spring perch ready for a spring
Hits: 1233
Size: 90.95 KB
Posted: 4/20/05
New spring perch ready for a spring
Here comes my new fancy, made by Deaver, Superflex 78/79 6" lift springs.  I chose these in preperat...
Hits: 1220
Size: 77.28 KB
Posted: 4/20/05
Here comes my new fancy, made by Deaver, Superflex 78/79 6" lift springs. I chose these in preperat...
Mounted and lookin sweet!
Hits: 1164
Size: 93.1 KB
Posted: 4/20/05
Mounted and lookin sweet!

Hits: 1131
Size: 90.11 KB
Posted: 4/20/05
New Bilstein shocks.  My extended brake lines are stretched to the limit.  I also can bottom the sho...
Hits: 1149
Size: 69.91 KB
Posted: 4/20/05
New Bilstein shocks. My extended brake lines are stretched to the limit. I also can bottom the sho...
I moved the spring bucket forward  approximately 1" in preperation for an SAS
Hits: 1154
Size: 63.91 KB
Posted: 4/20/05
I moved the spring bucket forward approximately 1" in preperation for an SAS
With the springs installed as shipped I had 10" of lift!!!
Hits: 1047
Size: 57.93 KB
Posted: 4/20/05
With the springs installed as shipped I had 10" of lift!!!
It might be hard to get out of the garage like this
Hits: 1056
Size: 60.65 KB
Posted: 4/20/05
It might be hard to get out of the garage like this
The cool thing about these springs is you can make adjustments if necessary
Hits: 1121
Size: 81.33 KB
Posted: 4/20/05
The cool thing about these springs is you can make adjustments if necessary

Hits: 1025
Size: 72 KB
Posted: 4/20/05

Hits: 1041
Size: 95.18 KB
Posted: 4/20/05
Turned out far better than I had pictured!
Hits: 1203
Size: 91.03 KB
Posted: 4/20/05
Turned out far better than I had pictured!
I mounted the limiting straps in between the shock mounts
Hits: 1468
Size: 91.85 KB
Posted: 4/20/05
I mounted the limiting straps in between the shock mounts

Hits: 1218
Size: 82.09 KB
Posted: 4/20/05
I have a full 10" of droop with the limiting straps installed!  Not too bad for a TTB!
Hits: 2759
Size: 80.41 KB
Posted: 4/20/05
I have a full 10" of droop with the limiting straps installed! Not too bad for a TTB!

About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog