Meixter > 1991 Ford Bronco > open folder Superflex TTB

Url
Tag
Img
Thumb
The frame after removing the TTB upper spring bucket and shocks
Url
Tag
Img
Thumb
Marking the hole to mount a 78/79 lower spring perch
Url
Tag
Img
Thumb
A little drill press action
Url
Tag
Img
Thumb
This is the TTB lower spring mount after some cutting and grinding. This was used to support the 78...
Url
Tag
Img
Thumb
Frame cleaned up
Url
Tag
Img
Thumb
Anti-rust
Url
Tag
Img
Thumb
The engine cross member was in the way on the drivers side so I put 3 bolts where I could and button...
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
I used an F250 shock hanger for a new shock mount
Url
Tag
Img
Thumb
New spring perch ready for a spring
Url
Tag
Img
Thumb
Here comes my new fancy, made by Deaver, Superflex 78/79 6" lift springs. I chose these in preperat...
Url
Tag
Img
Thumb
Mounted and lookin sweet!
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
New Bilstein shocks. My extended brake lines are stretched to the limit. I also can bottom the sho...
Url
Tag
Img
Thumb
I moved the spring bucket forward approximately 1" in preperation for an SAS
Url
Tag
Img
Thumb
With the springs installed as shipped I had 10" of lift!!!
Url
Tag
Img
Thumb
It might be hard to get out of the garage like this
Url
Tag
Img
Thumb
The cool thing about these springs is you can make adjustments if necessary
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
Turned out far better than I had pictured!
Url
Tag
Img
Thumb
I mounted the limiting straps in between the shock mounts
Url
Tag
Img
Thumb
Url
Tag
Img
Thumb
I have a full 10" of droop with the limiting straps installed! Not too bad for a TTB!
Url
Tag
Img
Thumb

About SuperMotors | Contact Us | FAQ/Help | Legal
Copyright © 1998-2022 Web Design Solutions, Inc.
All rights reserved. Duplication & reproduction is strictly prohibited.
SuperMotors.net v5.0.2 ChangeLog