DSCN5007.JPG
592 hits | 92.64 KB | Posted: 4/12/06
2X3 by 1/4" tube steel with 3/16 angle iron to make the new crossmember. This will be an attachment...

DSCN5008.JPG
615 hits | 96.57 KB | Posted: 4/12/06

DSCN5009.JPG
571 hits | 78.35 KB | Posted: 4/12/06
Ends drilled and welded to tubing

DSCN5010.JPG
598 hits | 73.63 KB | Posted: 4/12/06

DSCN5011.JPG
641 hits | 86.46 KB | Posted: 4/12/06
Gussetting

DSCN5012.JPG
605 hits | 94.03 KB | Posted: 4/12/06

DSCN5013.JPG
634 hits | 96.4 KB | Posted: 4/12/06

DSCN5014.JPG
596 hits | 83.42 KB | Posted: 4/12/06
I thought this cleaned up pretty good

DSCN5015.JPG
552 hits | 95.51 KB | Posted: 4/12/06

DSCN5016.JPG
565 hits | 90.48 KB | Posted: 4/12/06
Test fit with one bolt per side

DSCN5017.JPG
570 hits | 97.8 KB | Posted: 4/12/06

DSCN5018.JPG
551 hits | 88.36 KB | Posted: 4/12/06
I moved it back as far as I could

DSCN5019.JPG
510 hits | 66.38 KB | Posted: 4/12/06
Tucked up tight to the frame there is still clearance to the front driveline ujoint

DSCN5020.JPG
496 hits | 94.54 KB | Posted: 4/16/06
This will be the tranny support

DSCN5021.JPG
502 hits | 91.14 KB | Posted: 4/16/06

DSCN5022.JPG
561 hits | 98.41 KB | Posted: 4/16/06

DSCN5024.JPG
531 hits | 98.06 KB | Posted: 4/16/06
Notched to allow access to the tranny mount nuts

DSCN5025.JPG
566 hits | 75.91 KB | Posted: 4/16/06

DSCN5026.JPG
646 hits | 84.36 KB | Posted: 4/16/06
Good weld penetration

DSCN5027.JPG
557 hits | 101.38 KB | Posted: 4/16/06

DSCN5028.JPG
540 hits | 106.26 KB | Posted: 4/16/06

DSCN5029.JPG
532 hits | 104.86 KB | Posted: 4/16/06

DSCN5030.JPG
589 hits | 104.32 KB | Posted: 4/16/06

DSCN5031.JPG
565 hits | 99.53 KB | Posted: 4/16/06

DSCN5033.JPG
599 hits | 86.42 KB | Posted: 4/16/06

DSCN5034.JPG
614 hits | 100.42 KB | Posted: 4/16/06
Taking shape

DSCN5035.JPG
549 hits | 91.02 KB | Posted: 4/16/06

DSCN5036.JPG
584 hits | 108.79 KB | Posted: 4/16/06
These holes will fit the stock tranny mount

DSCN5037.JPG
587 hits | 98.44 KB | Posted: 4/16/06

DSCN5038.JPG
582 hits | 97.24 KB | Posted: 4/16/06

DSCN5039.JPG
539 hits | 85.09 KB | Posted: 4/16/06
Tranny mount attached to the crossmember

DSCN5040.JPG
619 hits | 109.55 KB | Posted: 4/16/06
Ready for paint

DSCN5041.JPG
598 hits | 93.57 KB | Posted: 4/16/06
I'll add the tabs for the end of my radius arms later

DSCN5046.JPG
608 hits | 80.24 KB | Posted: 4/20/06

DSCN5047.JPG
723 hits | 93.11 KB | Posted: 4/20/06
installed and ready for radius arms

DSCN5115.JPG
591 hits | 78.96 KB | Posted: 3/2/08
Tabs for the radius arms

DSCN5117.JPG
578 hits | 82.17 KB | Posted: 3/2/08