IMG_1273.JPG 3144 hits | 64.23 KB | Posted: 8/23/03 After Shackle Flip. I got just about what I expected from the lift. About 4-4.5" of lift. (Posted in: Shackle Flip(08/23/03))
tailgate_parts_4.jpg 3090 hits | 27.39 KB | Posted: 6/29/03 Support the tailgate while slightly open, and remove the torsion bar retainer from the body. (Posted in: Tailgate)
16E.jpg 3084 hits | 37.7 KB | Posted: 6/29/03 Fuse panel was taken out of a 1996 F-150; I re-wired it to suit my needs. The EEC self test plugs and MAP sensor are on the passenger side in the 1986 EFI trucks. I swapped mine to a BP sensor for my MAF engine. (Posted in: Electrical)
backseat.JPG 3077 hits | 22.72 KB | Posted: 6/29/03 Picture of the back seat. As clean as the interior is, it's hard to belive it's an '87 with 170,000 miles on it. (Posted in: Interior)
frame002.jpg 3076 hits | 60.24 KB | Posted: 8/1/03 After lots of cutting and grinding and pounding (Posted in: D60)
centdsf[1].jpg 3066 hits | 48.96 KB | Posted: 7/6/03 1986 CENTURION - ONE OF THE EBAY PICTURES THAT MADE ME WANT THIS THING - IT NEEDED WORK! (Posted in: 1986 CENTURION)
d60003.jpg 2962 hits | 59.84 KB | Posted: 8/1/03 Ready for a rebuild (Posted in: D60)
Broncosideview2.jpg 2936 hits | 48.86 KB | Posted: 2/9/04 Early shot of Bronco with 4" Superlift and 35" MT/Rs. (Posted in: Bronco Pictures)
DCP_0456.jpg 2935 hits | 61.03 KB | Posted: 12/31/03 Completed rock slider with steel mesh step board. (12/31/2003) (Posted in: Rock Slider Step Boards)
20070613 - CB Antenna Mount 001.jpg 2922 hits | 46.04 KB | Posted: 6/13/07 CB Radio Antenna Mount
Mounted to Tire Carrier Bracket
(can't depend on the swing arm pin for good ground)
Swing arm in latched position.
Coax routed through tail light. Used a round file to make a small little notch in top of tail light len... (Posted in: CB Radio & Antenna)